Assumed Uboot and environment are located in NAND flash.
Just a short question: Is the ECC done before the CRC check, or is the
CRC check done first?
>From my observation I would assume that first CRC is checked. But if
so - imho in my case (environment in NAND, which is handled with ECC)
this wouldn't make sense.
Am I right, that in this situation I should configure uboot to NOT use
CRC protection?
Best regards
Arno
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
