Please ignore this message. Was a mistake. Sorry for the noise...
On 09/28/2011 04:44 PM, Simon Schwarz wrote: > This adds the capability to OMAP3 SPL to load the Linux/U-Boot image with DMA. > > Based on: > - u-boot-ti/next > - SPL direct Linux boot: > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/108814 > > Simon Schwarz (6): > omap3: Add Base register for DMA > omap3: Add DMA register accessors > omap3: Add interface for omap3 DMA > nand_spl_simple: Add omap3 DMA usage to SPL > SPL: Add DMA library > devkit8000: Activate DMA support in SPL > > arch/arm/include/asm/arch-omap3/cpu.h | 45 ++++++++ > arch/arm/include/asm/arch-omap3/dma.h | 77 +++++++++++++ > arch/arm/include/asm/arch-omap3/omap3.h | 3 + > doc/README.SPL | 1 + > doc/README.omap3 | 18 +++ > drivers/dma/Makefile | 1 + > drivers/dma/omap3_dma.c | 180 > ++++++++++++++++++++++++++++++ > drivers/mtd/nand/nand_spl_simple.c | 185 > +++++++++++++++++++++++++++++-- > include/configs/devkit8000.h | 2 + > spl/Makefile | 1 + > 10 files changed, 504 insertions(+), 9 deletions(-) > create mode 100644 arch/arm/include/asm/arch-omap3/dma.h > create mode 100644 drivers/dma/omap3_dma.c > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
