On Tue, Oct 4, 2011 at 10:32 AM, Stephen Warren <[email protected]> wrote: > Without this, the GPIO_CNF register will not be programmed, and hence the > GPIO signals will not reach the pins; the pinmux's configured function > will be routed to the pins instead. > > v2: s/SDMMC4/SDMMC3/ in strings passed to gpio_request(). > > Signed-off-by: Stephen Warren <[email protected]>
Acked-by: Simon Glass <[email protected]> > --- > board/nvidia/seaboard/seaboard.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/board/nvidia/seaboard/seaboard.c > b/board/nvidia/seaboard/seaboard.c > index bc67d0f..1310e3d 100644 > --- a/board/nvidia/seaboard/seaboard.c > +++ b/board/nvidia/seaboard/seaboard.c > @@ -62,9 +62,11 @@ void gpio_config_uart(void) > void gpio_config_mmc(void) > { > /* Set EN_VDDIO_SD (GPIO I6) */ > + gpio_request(GPIO_PI6, "SDMMC3 power"); > gpio_direction_output(GPIO_PI6, 1); > > /* Config pin as GPI for Card Detect (GPIO I5) */ > + gpio_request(GPIO_PI5, "SDMMC3 card detect"); > gpio_direction_input(GPIO_PI5); > } > > -- > 1.7.0.4 > > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
