Hi Albert, On Tue, Oct 11, 2011 at 1:11 PM, Albert ARIBAUD <[email protected]> wrote: > Hi Simon, > > Le 22/09/2011 00:40, Simon Glass a écrit : >> >> This adds to the basic clock functionality already available. The concept >> of a peripheral ID is introduced, and all peripheral clock access is done >> using this ID. >> >> Functions are provided to start, query and adjust peripheral clocks, >> including automatic selection of the best available clock based on the >> requested rate (this replaces hard-coded divisors). >> >> On the pinmux side we can now select functions for pin groups using the >> new pinmux_set_func() function. >> >> Expanded functions are provided to adjust and query PLL clocks. >> >> With a full compliment of clock and pinmux functions, it should no longer >> be necessary for board/driver code to directly access clock registers. >> This >> change removes all such accesses. >> >> This functionality will be used for I2C, SPI, LCD, USB, keyboard, NAND and >> other drivers for Tegra2. >> >> At then end is a patch to enable MMC on Seaboard, to make it all >> worthwhile. >> >> Note: These patches include a definition of assert() which I will happily >> remove if the one sent upstream is accepted. >> >> Changes in v2: >> - Remove assert() which is now in common.h > > Series applied to u-boot-arm/master, thanks!
Thank you Albert. Will work on the next series now. Regards, Simon > > Amicalement, > -- > Albert. > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
