Hi Simon,
Le 15/10/2011 02:03, Simon Glass a écrit :
> From: Scott Wood<scottw...@freescale.com>
>
> From: Scott Wood<scottw...@freescale.com>
>
> This improves the performance of U-Boot when accepting rapid input,
> such as pasting a sequence of commands.
>
> Without this patch, on P4080DS I see a maximum of around 5 lines can
> be pasted. With this patch, it handles around 70 lines before lossage,
> long enough for most things you'd paste.
>
> With it enabled, on ppc it's an extra 396 bytes of image size, and 1056
> bytes of BSS.
>
> ARM note from Simon Glass<s...@chromium.org> - ARM code size goes from
> 212 to 484 bytes (extra 272 bytes), BSS to 1056 bytes.
>
> Signed-off-by: Scott Wood<scottw...@freescale.com>
> ---
> Changes in v2:
> - Fix checkpatch warnings, the other one was already there
A general question: is the issue with input as such, or with echoing
this input?
> README | 8 ++++
> drivers/serial/ns16550.c | 96
> +++++++++++++++++++++++++++++++++++++++++++--
> drivers/serial/serial.c | 5 +-
> include/ns16550.h | 4 +-
> 4 files changed, 104 insertions(+), 9 deletions(-)
>
> diff --git a/README b/README
> index 7e032a9..28d2e8a 100644
> --- a/README
> +++ b/README
> @@ -2862,6 +2862,14 @@ use the "saveenv" command to store a valid environment.
> space for already greatly restricted images, including but not
> limited to NAND_SPL configurations.
>
> +- CONFIG_NS16550_BUFFER_READS:
> + Instead of reading directly from the receive register
> + every time U-Boot is ready for another byte, keep a
> + buffer and fill it from the hardware fifo every time
> + U-Boot reads a character. This helps U-Boot keep up with
> + a larger amount of rapid input, such as happens when
> + pasting text into the terminal.
> +
> Low Level (hardware related) configuration options:
> ---------------------------------------------------
>
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index 0174744..a012e5d 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -4,12 +4,15 @@
> * modified to use CONFIG_SYS_ISA_MEM and new defines
> */
>
> +#include<common.h>
> #include<config.h>
> #include<ns16550.h>
> #include<watchdog.h>
> #include<linux/types.h>
> #include<asm/io.h>
>
> +DECLARE_GLOBAL_DATA_PTR;
> +
> #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
> #define UART_MCRVAL (UART_MCR_DTR | \
> UART_MCR_RTS) /* RTS/DTR */
> @@ -92,21 +95,104 @@ void NS16550_putc (NS16550_t com_port, char c)
> }
>
> #ifndef CONFIG_NS16550_MIN_FUNCTIONS
> -char NS16550_getc (NS16550_t com_port)
> +
> +static char NS16550_raw_getc(NS16550_t regs)
> {
> - while ((serial_in(&com_port->lsr)& UART_LSR_DR) == 0) {
> + while ((serial_in(®s->lsr)& UART_LSR_DR) == 0) {
> #ifdef CONFIG_USB_TTY
> extern void usbtty_poll(void);
> usbtty_poll();
> #endif
> WATCHDOG_RESET();
> }
> - return serial_in(&com_port->rbr);
> + return serial_in(®s->rbr);
> +}
> +
> +static int NS16550_raw_tstc(NS16550_t regs)
> +{
> + return ((serial_in(®s->lsr)& UART_LSR_DR) != 0);
> +}
> +
> +
> +#ifdef CONFIG_NS16550_BUFFER_READS
> +
> +#define BUF_SIZE 256
I guess this define conditions how well U-Boot will cope with steady
high-rate input, correct? If so, I'd like it to be a configuration
option -- actually, one could combine enabling the option *and* setting
the expected buffer size.
> +#define NUM_PORTS 4
> +
> +struct ns16550_priv {
> + char buf[BUF_SIZE];
> + unsigned int head, tail;
> +};
> +
> +static struct ns16550_priv rxstate[NUM_PORTS];
> +
> +static void enqueue(unsigned int port, char ch)
> +{
> + /* If queue is full, drop the character. */
> + if ((rxstate[port].head - rxstate[port].tail - 1) % BUF_SIZE == 0)
> + return;
> +
> + rxstate[port].buf[rxstate[port].tail] = ch;
> + rxstate[port].tail = (rxstate[port].tail + 1) % BUF_SIZE;
> +}
> +
> +static int dequeue(unsigned int port, char *ch)
> +{
> + /* Empty queue? */
> + if (rxstate[port].head == rxstate[port].tail)
> + return 0;
> +
> + *ch = rxstate[port].buf[rxstate[port].head];
> + rxstate[port].head = (rxstate[port].head + 1) % BUF_SIZE;
> + return 1;
> +}
> +
> +static void fill_rx_buf(NS16550_t regs, unsigned int port)
> +{
> + while ((serial_in(®s->lsr)& UART_LSR_DR) != 0)
> + enqueue(port, serial_in(®s->rbr));
> +}
> +
> +char NS16550_getc(NS16550_t regs, unsigned int port)
> +{
> + char ch;
> +
> + if (port>= NUM_PORTS || !(gd->flags& GD_FLG_RELOC))
> + return NS16550_raw_getc(regs);
> +
> + do {
> +#ifdef CONFIG_USB_TTY
> + extern void usbtty_poll(void);
> + usbtty_poll();
> +#endif
> + fill_rx_buf(regs, port);
> + WATCHDOG_RESET();
> + } while (!dequeue(port,&ch));
> +
> + return ch;
> +}
> +
> +int NS16550_tstc(NS16550_t regs, unsigned int port)
> +{
> + if (port>= NUM_PORTS || !(gd->flags& GD_FLG_RELOC))
> + return NS16550_raw_tstc(regs);
> +
> + fill_rx_buf(regs, port);
> +
> + return rxstate[port].head != rxstate[port].tail;
> +}
> +
> +#else /* CONFIG_NS16550_BUFFER_READS */
> +
> +char NS16550_getc(NS16550_t regs, unsigned int port)
> +{
> + return NS16550_raw_getc(regs);
> }
>
> -int NS16550_tstc (NS16550_t com_port)
> +int NS16550_tstc(NS16550_t regs, unsigned int port)
> {
> - return ((serial_in(&com_port->lsr)& UART_LSR_DR) != 0);
> + return NS16550_raw_tstc(regs);
> }
>
> +#endif /* CONFIG_NS16550_BUFFER_READS */
> #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
> diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
> index 0d56e78..cf9a1dd 100644
> --- a/drivers/serial/serial.c
> +++ b/drivers/serial/serial.c
> @@ -93,6 +93,7 @@ static NS16550_t serial_ports[4] = {
> };
>
> #define PORT serial_ports[port-1]
> +#define PORTNR (port-1)
> #if defined(CONFIG_CONS_INDEX)
> #define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1])
> #endif
> @@ -219,13 +220,13 @@ _serial_puts (const char *s,const int port)
> int
> _serial_getc(const int port)
> {
> - return NS16550_getc(PORT);
> + return NS16550_getc(PORT, PORTNR);
> }
>
> int
> _serial_tstc(const int port)
> {
> - return NS16550_tstc(PORT);
> + return NS16550_tstc(PORT, PORTNR);
> }
>
> void
> diff --git a/include/ns16550.h b/include/ns16550.h
> index 51f1c17..60b0abc 100644
> --- a/include/ns16550.h
> +++ b/include/ns16550.h
> @@ -164,6 +164,6 @@ typedef volatile struct NS16550 *NS16550_t;
>
> void NS16550_init (NS16550_t com_port, int baud_divisor);
> void NS16550_putc (NS16550_t com_port, char c);
> -char NS16550_getc (NS16550_t com_port);
> -int NS16550_tstc (NS16550_t com_port);
> +char NS16550_getc(NS16550_t regs, unsigned int port);
> +int NS16550_tstc(NS16550_t regs, unsigned int port);
> void NS16550_reinit (NS16550_t com_port, int baud_divisor);
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
