Hi Sandeep, Le 21/10/2011 19:00, [email protected] a écrit : > Albert, > Please pull u-boot-ti/master > > Regards, > Sandeep > > > The following changes since commit efb2172ece93ef48f34fb8bdf963d3b72880cc7d: > Simon Glass (1): > Move timestamp and version files into 'generated' subdir > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git master > > Aneesh V (1): > omap: spl: fix build break due to changes in FAT > > Chandan Nath (5): > ARM:AM33XX: Added support for AM33xx > ARM:AM33XX: Add clock definitions > ARM:AM33XX: Add emif/ddr support > ARM:AM33XX: Added timer support > ARM:AM33XX: Add support for TI AM335X EVM > > Christian Riesch (1): > da850evm: Move LPSC configuration to board_early_init_f() > > Heiko Schocher (1): > arm, davinci: add missing LSPC define for MMC/SD1 > > Ilya Yanok (1): > omap3/emif4: fix registers definition > > Joe Hershberger (2): > omap: Don't use gpio_free to change direction to input > omap4_panda: Build in cmd_gpio support on panda > > Joel A Fernandes (1): > Makefile: Remove MLO on make clean > > Manjunath Hadli (6): > dm644X: revert cache disable patch > dm36x: revert cache disable patch > da830: add support for NAND boot mode > davinci: emac: add new features to autonegotiate for EMAC > davinci: emac: add support for more than 1 PHYs > davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM > > Philip Balister (3): > OMAP3: overo : Use ttyO2 instead of ttyS2. > OMAP3: overo: Move ethernet CS4 configuration to execute based on > board id > OMAP3: overo : Add environment variable optargs to bootargs > > Ricardo Salveti de Araujo (3): > omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL > omap4: adding revision detection for 4460 ES1.1 > omap4: splitting padconfs into common, 4430 and 4460 > > SRICHARAN R (1): > U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. > > Sergei Shtylyov (1): > DaVinci: correct MDSTAT.STATE mask > > Simon Schwarz (4): > omap3: Add Base register for DMA > omap3: Add DMA register accessors > omap3: Add interface for omap3 DMA > SPL: Add DMA library > > Steve Sakoman (3): > omap: overo: Configure mux for gpio10 > omap: overo: Disable pull-ups on camera PCLK, HS and VS signals > omap: beagle: Use ubifs instead of jffs2 for nand boot > > Tom Rini (3): > OMAP3 SPL: Provide weak omap_rev_string > devkit8000: Add malloc space > mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset > > Vladimir Zapolskiy (1): > davinci: remove config.mk file from the sources
Applied to u-boot-arm/master (with rebase, as the pull request was based on u-boot, not u-boot-arm), thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
