Dear [email protected], In message <[email protected]> you wrote: > From: Tang Yuantian <[email protected]> > > Add the Silicon Image series PCI Express to > Serial ATA controller support, including Sil3132, > Sil3131 and Sil3124. > The SATA controller can be used to load kernel. > > The features list: > - Supports 1-lane 2.5 Gbit/s PCI Express > - Supports one/two/four independent Serial ATA channels > - Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s > - Supports LBA28 and LBA48 > > Signed-off-by: Tang Yuantian <[email protected]> > Signed-off-by: Aaron Williams <[email protected]> > Tested-by: Lan Chunhe <[email protected]> > --- > git tree: git://git.denx.de/u-boot.git > branch: master > Test platform:P1022DS, P4080DS > V4: > - fix checkpatch warning: > WARNING: externs should be avoided in .c files > #90: FILE: drivers/block/sata_sil.c:37: > +extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; > V3: > - remove __IOMEM > - remove force cast > V2: > - add virt_to_bus to translate address > - fix some issues > > drivers/block/Makefile | 1 + > drivers/block/sata_sil.c | 722 > ++++++++++++++++++++++++++++++++++++++++++++++ > drivers/block/sata_sil.h | 229 +++++++++++++++ > include/pci_ids.h | 5 + > 4 files changed, 957 insertions(+), 0 deletions(-) > create mode 100644 drivers/block/sata_sil.c > create mode 100644 drivers/block/sata_sil.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] In C we had to code our own bugs, in C++ we can inherit them. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
