Define CONFIG_DV_USBPHY_CTL for setting the USB PHY control
register.
Signed-off-by: Heiko Schocher <[email protected]>
Acked-by: Remy Bohmer <[email protected]>
cc: Sandeep Paulraj <[email protected]>
cc: Remy Bohmer <[email protected]>
---
drivers/usb/musb/davinci.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 27dc4bc..c17c867 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -26,6 +26,10 @@
#include "davinci.h"
#include <asm/arch/hardware.h>
+#if !defined(CONFIG_DV_USBPHY_CTL)
+#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN)
+#endif
+
/* MUSB platform configuration */
struct musb_config musb_cfg = {
.regs = (struct musb_regs *)MENTOR_USB0_BASE,
@@ -50,7 +54,7 @@ static u8 phy_on(void)
writel(USBPHY_PHY24MHZ | USBPHY_SESNDEN |
USBPHY_VBDTCTEN, USBPHY_CTL_PADDR);
#else
- writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN, USBPHY_CTL_PADDR);
+ writel(CONFIG_DV_USBPHY_CTL, USBPHY_CTL_PADDR);
#endif
timeout = musb_cfg.timeout;
--
1.7.6.4
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
