On 10/31/2011 03:36 PM, Fabio Estevam wrote: > Hi Stefano and Albert, > > I would like to enable cache on some i.MX boards (ARM9, ARM11 and Cortex-A8). > > Are there any boards I could use as a reference on how to properly > implement this? > > I thought I should simply do: > > #undef CONFIG_SYS_ICACHE_OFF > #undef CONFIG_SYS_DCACHE_OFF
This is not enough, at least for systems where cache is not yet supported. > > ,but still I get a 'WARNING: Caches not enabled' message when I do this. The reason is that enable_caches is missing for i.MX targets. You can try to add enable_caches inside your board file, and implement it calling dcache_enable(). However, i.MX drivers are actually proofed to be faulty when the cache is enabled. At least the FEC driver and the MMC driver must be changed to make them working when cache is on. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
