On Wed, Oct 12, 2011 at 09:32:06AM +0200, Christian Hitz wrote: > The software ECC algorithm is not necessary when hardware ECC > is available and can be left out for a smaller image size. > Enable with CONFIG_MTD_ECC_SOFT. > > Signed-off-by: Christian Hitz <[email protected]> > Cc: Scott Wood <[email protected]> > --- > > Saves 2312 bytes of image size when software ECC is not used. > > Changes since v1: > - new option to disable software ECC > > drivers/mtd/nand/Makefile | 2 +- > drivers/mtd/nand/nand_base.c | 4 ++++ > include/linux/mtd/nand_ecc.h | 25 +++++++++++++++++++++++++ > 3 files changed, 30 insertions(+), 1 deletions(-)
Please check which boards select drivers which may use soft ECC, and have them #define CONFIG_MTD_ECC_SOFT. -Scott _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
