Dear [email protected], In message <[email protected]> you wrote: > > in my project, u-boot (2009.11) loads a large jffs2-rootfs image (80 MB, w > ith an attached crc32-checksum) from SD-card into a NAND-Flash. > To ensure the validity of the rootfs, i let u-boot then clear the RAM-part, > read back the rootfs from NAND into RAM, do a crc32 checksum over it and c > ompare this > checksum with the crc32- checksum that was attached to the image. > This validity check takes about 70 seconds. Do you know a faster/better way > of checking the validity?
Please make sure your line length does not exceed some 70 characters or so. Thanks. I smell this is on an ARM system? In this case you should update and use a more recent version of U-Boot, where we have support for caches. This usually helps a _lot_. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] "It's when they say 2 + 2 = 5 that I begin to argue." - Eric Pepke _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
