This is a well encapsulated section of mmc_send_cmd, by moving it to it's own function it increases the readability of mmc_send_cmd.
Signed-off-by: Anton Staaf <[email protected]> Cc: Andy Fleming <[email protected]> Cc: Tom Warren <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Albert Aribaud <[email protected]> --- drivers/mmc/tegra2_mmc.c | 42 +++++++++++++++++++++++++----------------- 1 files changed, 25 insertions(+), 17 deletions(-) diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c index 4bd790a..7870a88 100644 --- a/drivers/mmc/tegra2_mmc.c +++ b/drivers/mmc/tegra2_mmc.c @@ -101,29 +101,19 @@ static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) writew(mode, &host->reg->trnmod); } -static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) +static int mmc_wait_inhibit(struct mmc_host *host, + struct mmc_cmd *cmd, + struct mmc_data *data, + unsigned int timeout) { - struct mmc_host *host = (struct mmc_host *)mmc->priv; - int flags, i; - unsigned int timeout; - unsigned int mask; - unsigned int retry = 0x100000; - debug(" mmc_send_cmd called\n"); - - /* Wait max 10 ms */ - timeout = 10; - - mask = TEGRA2_MMC_PRNSTS_CMD_INHIBIT_CMD_ACTIVE; - if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY)) - mask |= TEGRA2_MMC_PRNSTS_CMD_INHIBIT_DAT_ACTIVE; + unsigned int mask = TEGRA2_MMC_PRNSTS_CMD_INHIBIT_CMD_ACTIVE; /* * We shouldn't wait for data inhibit for stop commands, even * though they might use busy signaling */ - if (data) - mask &= ~TEGRA2_MMC_PRNSTS_CMD_INHIBIT_DAT_ACTIVE; + if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY)) + mask |= TEGRA2_MMC_PRNSTS_CMD_INHIBIT_DAT_ACTIVE; while (readl(&host->reg->prnsts) & mask) { if (timeout == 0) { @@ -134,6 +124,24 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, udelay(1000); } + return 0; +} + +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct mmc_host *host = (struct mmc_host *)mmc->priv; + int flags, i; + int result; + unsigned int mask; + unsigned int retry = 0x100000; + debug(" mmc_send_cmd called\n"); + + result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */); + + if (result < 0) + return result; + if (data) mmc_prepare_data(host, data); -- 1.7.3.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
