On 11/15/2011 02:40 PM, Bertrand Cachet wrote:
> From datasheet, when READY bit is set inside PM_CTRL register, it means that
> device is already in *normal* (D0) mode => it doesn't need to be wake-up.
>
> With this patch, we only wake-up (writing on TEST_BYTE register) if PM_MODE
> bits of PM_CTRL register is in sleep (D1/D2) mode.
>
> Signed-off-by: Bertrand Cachet <[email protected]>
> ---
> v2: Improve code styling by grouping two narrow comments.
> v3: Place versions information under scissors line.
> v4: Use tabs instead of spaces (vimrc problem)
>
> drivers/net/smc911x.h | 7 +++++--
> 1 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
> index 8ce08a9..a290073 100644
> --- a/drivers/net/smc911x.h
> +++ b/drivers/net/smc911x.h
> @@ -471,8 +471,11 @@ static void smc911x_reset(struct eth_device *dev)
> {
> int timeout;
>
> - /* Take out of PM setting first */
> - if (smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) {
> + /*
> + * Take out of PM setting first
> + * Device is already wake up if PMT_CTRL_READY bit is set
> + */
> + if ((smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) == 0) {
> /* Write to the bytetest will take out of powerdown */
> smc911x_reg_write(dev, BYTE_TEST, 0x0);
Agree, this is the correct behavior. However, checkpatch report errors
(due to leading white space instead of tabs in the comment you added):
ERROR: code indent should use tabs where possible
#29: FILE: drivers/net/smc911x.h:475:
+ ^I * Take out of PM setting first$
WARNING: please, no space before tabs
#29: FILE: drivers/net/smc911x.h:475:
+ ^I * Take out of PM setting first$
ERROR: code indent should use tabs where possible
#30: FILE: drivers/net/smc911x.h:476:
+ ^I * Device is already wake up if PMT_CTRL_READY bit is set$
WARNING: please, no space before tabs
#30: FILE: drivers/net/smc911x.h:476:
+ ^I * Device is already wake up if PMT_CTRL_READY bit is set$
total: 2 errors, 2 warnings, 13 lines checked
NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
scripts/cleanfile
Can you fix and repost (maybe setting me as CC, I will take care of your
patch).
Thanks,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
