Hi Marek, On Fri, Nov 25, 2011 at 10:53 AM, Marek Vasut <[email protected]> wrote: > The board is unmaintained and maintainer doesn't respond.
Should this and the other patches be version 2, or perhaps 3? Also I like Mike's suggested phrasing (something like "The board doesn't build and maintainer doesn't respond") since if it built OK we would presumably just leave it. Regards, Simon > > Signed-off-by: Marek Vasut <[email protected]> > Cc: Simon Glass <[email protected]> > Cc: Anatolij Gustschin <[email protected]> > --- > MAINTAINERS | 4 - > board/cerf250/Makefile | 43 ----- > board/cerf250/cerf250.c | 85 --------- > board/cerf250/flash.c | 429 > --------------------------------------------- > boards.cfg | 1 - > doc/README.scrapyard | 1 + > include/configs/cerf250.h | 229 ------------------------ > 7 files changed, 1 insertions(+), 791 deletions(-) > delete mode 100644 board/cerf250/Makefile > delete mode 100644 board/cerf250/cerf250.c > delete mode 100644 board/cerf250/flash.c > delete mode 100644 include/configs/cerf250.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 37bbb34..3835154 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -711,10 +711,6 @@ Sergey Kubushyn <[email protected]> > SONATA ARM926EJS > SCHMOOGIE ARM926EJS > > -Prakash Kumar <[email protected]> > - > - cerf250 xscale/pxa > - > Vipin Kumar <[email protected]> > > spear300 ARM926EJS (spear300 Soc) > diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile > deleted file mode 100644 > index cf4742e..0000000 > --- a/board/cerf250/Makefile > +++ /dev/null > @@ -1,43 +0,0 @@ > -# > -# (C) Copyright 2000-2006 > -# Wolfgang Denk, DENX Software Engineering, [email protected]. > -# > -# See file CREDITS for list of people who contributed to this > -# project. > -# > -# This program is free software; you can redistribute it and/or > -# modify it under the terms of the GNU General Public License as > -# published by the Free Software Foundation; either version 2 of > -# the License, or (at your option) any later version. > -# > -# This program is distributed in the hope that it will be useful, > -# but WITHOUT ANY WARRANTY; without even the implied warranty of > -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > -# GNU General Public License for more details. > -# > -# You should have received a copy of the GNU General Public License > -# along with this program; if not, write to the Free Software > -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > -# MA 02111-1307 USA > -# > - > -include $(TOPDIR)/config.mk > - > -LIB = $(obj)lib$(BOARD).o > - > -COBJS := cerf250.o flash.o > - > -SRCS := $(COBJS:.o=.c) > -OBJS := $(addprefix $(obj),$(COBJS)) > - > -$(LIB): $(obj).depend $(OBJS) > - $(call cmd_link_o_target, $(OBJS)) > - > -######################################################################### > - > -# defines $(obj).depend target > -include $(SRCTREE)/rules.mk > - > -sinclude $(obj).depend > - > -######################################################################### > diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c > deleted file mode 100644 > index 043afea..0000000 > --- a/board/cerf250/cerf250.c > +++ /dev/null > @@ -1,85 +0,0 @@ > -/* > - * (C) Copyright 2002 > - * Kyle Harris, Nexus Technologies, Inc. [email protected] > - * > - * (C) Copyright 2002 > - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> > - * Marius Groeger <[email protected]> > - * > - * See file CREDITS for list of people who contributed to this > - * project. > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of > - * the License, or (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > - * MA 02111-1307 USA > - */ > - > -#include <common.h> > -#include <netdev.h> > - > -DECLARE_GLOBAL_DATA_PTR; > - > -/* ------------------------------------------------------------------------- > */ > - > - > -/* > - * Miscelaneous platform dependent initialisations > - */ > - > -int board_init (void) > -{ > - /* We have RAM, disable cache */ > - dcache_disable(); > - icache_disable(); > - > - /* arch number of cerf PXA Board */ > - gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF; > - > - /* adress of boot parameters */ > - gd->bd->bi_boot_params = 0xa0000100; > - > - return 0; > -} > - > -int board_late_init(void) > -{ > - setenv("stdout", "serial"); > - setenv("stderr", "serial"); > - return 0; > -} > - > -extern void pxa_dram_init(void); > -int dram_init(void) > -{ > - pxa_dram_init(); > - gd->ram_size = PHYS_SDRAM_1_SIZE; > - return 0; > -} > - > -void dram_init_banksize(void) > -{ > - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; > - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; > -} > - > -#ifdef CONFIG_CMD_NET > -int board_eth_init(bd_t *bis) > -{ > - int rc = 0; > -#ifdef CONFIG_SMC91111 > - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); > -#endif > - return rc; > -} > -#endif > diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c > deleted file mode 100644 > index e1e7807..0000000 > --- a/board/cerf250/flash.c > +++ /dev/null > @@ -1,429 +0,0 @@ > -/* > - * (C) Copyright 2001 > - * Kyle Harris, Nexus Technologies, Inc. [email protected] > - * > - * (C) Copyright 2001 > - * Wolfgang Denk, DENX Software Engineering, [email protected]. > - * > - * See file CREDITS for list of people who contributed to this > - * project. > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of > - * the License, or (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > - * MA 02111-1307 USA > - */ > - > -#include <common.h> > -#include <linux/byteorder/swab.h> > - > - > -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH > chips */ > - > -/* Board support for 1 or 2 flash devices */ > -#define FLASH_PORT_WIDTH32 > -#undef FLASH_PORT_WIDTH16 > - > -#ifdef FLASH_PORT_WIDTH16 > -#define FLASH_PORT_WIDTH ushort > -#define FLASH_PORT_WIDTHV vu_short > -#define SWAP(x) __swab16(x) > -#else > -#define FLASH_PORT_WIDTH ulong > -#define FLASH_PORT_WIDTHV vu_long > -#define SWAP(x) __swab32(x) > -#endif > - > -#define FPW FLASH_PORT_WIDTH > -#define FPWV FLASH_PORT_WIDTHV > - > -#define mb() __asm__ __volatile__ ("" : : : "memory") > - > -/*----------------------------------------------------------------------- > - * Functions > - */ > -static ulong flash_get_size (FPW *addr, flash_info_t *info); > -static int write_data (flash_info_t *info, ulong dest, FPW data); > -static void flash_get_offsets (ulong base, flash_info_t *info); > -void inline spin_wheel (void); > - > -/*----------------------------------------------------------------------- > - */ > - > -unsigned long flash_init (void) > -{ > - int i; > - ulong size = 0; > - > - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { > - switch (i) { > - case 0: > - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); > - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); > - break; > - case 1: > - flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]); > - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); > - break; > - default: > - panic ("configured too many flash banks!\n"); > - break; > - } > - size += flash_info[i].size; > - } > - > - /* Protect monitor and environment sectors > - */ > - flash_protect ( FLAG_PROTECT_SET, > - CONFIG_SYS_FLASH_BASE, > - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, > - &flash_info[0] ); > - > - flash_protect ( FLAG_PROTECT_SET, > - CONFIG_ENV_ADDR, > - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] > ); > - > - return size; > -} > - > -/*----------------------------------------------------------------------- > - */ > -static void flash_get_offsets (ulong base, flash_info_t *info) > -{ > - int i; > - > - if (info->flash_id == FLASH_UNKNOWN) { > - return; > - } > - > - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { > - for (i = 0; i < info->sector_count; i++) { > - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); > - info->protect[i] = 0; > - } > - } > -} > - > -/*----------------------------------------------------------------------- > - */ > -void flash_print_info (flash_info_t *info) > -{ > - int i; > - > - if (info->flash_id == FLASH_UNKNOWN) { > - printf ("missing or unknown FLASH type\n"); > - return; > - } > - > - switch (info->flash_id & FLASH_VENDMASK) { > - case FLASH_MAN_INTEL: > - printf ("INTEL "); > - break; > - default: > - printf ("Unknown Vendor "); > - break; > - } > - > - switch (info->flash_id & FLASH_TYPEMASK) { > - case FLASH_28F128J3A: > - printf ("28F128J3A\n"); > - break; > - default: > - printf ("Unknown Chip Type\n"); > - break; > - } > - > - printf (" Size: %ld MB in %d Sectors\n", > - info->size >> 20, info->sector_count); > - > - printf (" Sector Start Addresses:"); > - for (i = 0; i < info->sector_count; ++i) { > - if ((i % 5) == 0) > - printf ("\n "); > - printf (" %08lX%s", > - info->start[i], > - info->protect[i] ? " (RO)" : " "); > - } > - printf ("\n"); > - return; > -} > - > -/* > - * The following code cannot be run from FLASH! > - */ > -static ulong flash_get_size (FPW *addr, flash_info_t *info) > -{ > - volatile FPW value; > - > - /* Write auto select command: read Manufacturer ID */ > - addr[0x5555] = (FPW) 0x00AA00AA; > - addr[0x2AAA] = (FPW) 0x00550055; > - addr[0x5555] = (FPW) 0x00900090; > - > - mb (); > - value = addr[0]; > - > - switch (value) { > - > - case (FPW) INTEL_MANUFACT: > - info->flash_id = FLASH_MAN_INTEL; > - break; > - > - default: > - info->flash_id = FLASH_UNKNOWN; > - info->sector_count = 0; > - info->size = 0; > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ > - return (0); /* no or unknown flash */ > - } > - > - mb (); > - value = addr[1]; /* device ID */ > - > - switch (value) { > - > - case (FPW) INTEL_ID_28F128J3A: > - info->flash_id += FLASH_28F128J3A; > - info->sector_count = 128; > - info->size = 0x02000000; > - break; /* => 16 MB */ > - > - default: > - info->flash_id = FLASH_UNKNOWN; > - break; > - } > - > - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { > - printf ("** ERROR: sector count %d > max (%d) **\n", > - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); > - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; > - } > - > - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ > - > - return (info->size); > -} > - > - > -/*----------------------------------------------------------------------- > - */ > - > -int flash_erase (flash_info_t *info, int s_first, int s_last) > -{ > - int flag, prot, sect; > - ulong type, start; > - int rcode = 0; > - > - if ((s_first < 0) || (s_first > s_last)) { > - if (info->flash_id == FLASH_UNKNOWN) { > - printf ("- missing\n"); > - } else { > - printf ("- no sectors to erase\n"); > - } > - return 1; > - } > - > - type = (info->flash_id & FLASH_VENDMASK); > - if ((type != FLASH_MAN_INTEL)) { > - printf ("Can't erase unknown flash type %08lx - aborted\n", > - info->flash_id); > - return 1; > - } > - > - prot = 0; > - for (sect = s_first; sect <= s_last; ++sect) { > - if (info->protect[sect]) { > - prot++; > - } > - } > - > - if (prot) { > - printf ("- Warning: %d protected sectors will not be > erased!\n", > - prot); > - } else { > - printf ("\n"); > - } > - > - /* Disable interrupts which might cause a timeout here */ > - flag = disable_interrupts (); > - > - /* Start erase on unprotected sectors */ > - for (sect = s_first; sect <= s_last; sect++) { > - if (info->protect[sect] == 0) { /* not protected */ > - FPWV *addr = (FPWV *) (info->start[sect]); > - FPW status; > - > - printf ("Erasing sector %2d ... ", sect); > - > - /* arm simple, non interrupt dependent timer */ > - start = get_timer(0); > - > - *addr = (FPW) 0x00500050; /* clear status > register */ > - *addr = (FPW) 0x00200020; /* erase setup */ > - *addr = (FPW) 0x00D000D0; /* erase confirm */ > - > - while (((status = *addr) & (FPW) 0x00800080) != (FPW) > 0x00800080) { > - if (get_timer(start) > > CONFIG_SYS_FLASH_ERASE_TOUT) { > - printf ("Timeout\n"); > - *addr = (FPW) 0x00B000B0; /* > suspend erase */ > - *addr = (FPW) 0x00FF00FF; /* > reset to read mode */ > - rcode = 1; > - break; > - } > - } > - > - *addr = 0x00500050; /* clear status register cmd. > */ > - *addr = 0x00FF00FF; /* resest to read mode > */ > - > - printf (" done\n"); > - } > - } > - return rcode; > -} > - > -/*----------------------------------------------------------------------- > - * Copy memory to flash, returns: > - * 0 - OK > - * 1 - write timeout > - * 2 - Flash not erased > - * 4 - Flash not identified > - */ > - > -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) > -{ > - ulong cp, wp; > - FPW data; > - int count, i, l, rc, port_width; > - > - if (info->flash_id == FLASH_UNKNOWN) { > - return 4; > - } > -/* get lower word aligned address */ > -#ifdef FLASH_PORT_WIDTH16 > - wp = (addr & ~1); > - port_width = 2; > -#else > - wp = (addr & ~3); > - port_width = 4; > -#endif > - > - /* > - * handle unaligned start bytes > - */ > - if ((l = addr - wp) != 0) { > - data = 0; > - for (i = 0, cp = wp; i < l; ++i, ++cp) { > - data = (data << 8) | (*(uchar *) cp); > - } > - for (; i < port_width && cnt > 0; ++i) { > - data = (data << 8) | *src++; > - --cnt; > - ++cp; > - } > - for (; cnt == 0 && i < port_width; ++i, ++cp) { > - data = (data << 8) | (*(uchar *) cp); > - } > - > - if ((rc = write_data (info, wp, SWAP (data))) != 0) { > - return (rc); > - } > - wp += port_width; > - } > - > - /* > - * handle word aligned part > - */ > - count = 0; > - while (cnt >= port_width) { > - data = 0; > - for (i = 0; i < port_width; ++i) { > - data = (data << 8) | *src++; > - } > - if ((rc = write_data (info, wp, SWAP (data))) != 0) { > - return (rc); > - } > - wp += port_width; > - cnt -= port_width; > - if (count++ > 0x800) { > - spin_wheel (); > - count = 0; > - } > - } > - > - if (cnt == 0) { > - return (0); > - } > - > - /* > - * handle unaligned tail bytes > - */ > - data = 0; > - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { > - data = (data << 8) | *src++; > - --cnt; > - } > - for (; i < port_width; ++i, ++cp) { > - data = (data << 8) | (*(uchar *) cp); > - } > - > - return (write_data (info, wp, SWAP (data))); > -} > - > -/*----------------------------------------------------------------------- > - * Write a word or halfword to Flash, returns: > - * 0 - OK > - * 1 - write timeout > - * 2 - Flash not erased > - */ > -static int write_data (flash_info_t *info, ulong dest, FPW data) > -{ > - FPWV *addr = (FPWV *) dest; > - ulong status; > - int flag; > - ulong start; > - > - /* Check if Flash is (sufficiently) erased */ > - if ((*addr & data) != data) { > - printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); > - return (2); > - } > - /* Disable interrupts which might cause a timeout here */ > - flag = disable_interrupts (); > - > - *addr = (FPW) 0x00400040; /* write setup */ > - *addr = data; > - > - /* arm simple, non interrupt dependent timer */ > - start = get_timer(0); > - > - /* wait while polling the status register */ > - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { > - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { > - *addr = (FPW) 0x00FF00FF; /* restore read mode > */ > - return (1); > - } > - } > - > - *addr = (FPW) 0x00FF00FF; /* restore read mode */ > - > - return (0); > -} > - > -void inline spin_wheel (void) > -{ > - static int p = 0; > - static char w[] = "\\/-"; > - > - printf ("\010%c", w[p]); > - (++p == 3) ? (p = 0) : 0; > -} > diff --git a/boards.cfg b/boards.cfg > index 7c63449..d65ca12 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -216,7 +216,6 @@ actux3 arm ixp > actux4 arm ixp > dvlhost arm ixp > balloon3 arm pxa > -cerf250 arm pxa > colibri_pxa270 arm pxa > cradle arm pxa > lubbock arm pxa > diff --git a/doc/README.scrapyard b/doc/README.scrapyard > index cb5e4bc..232cd68 100644 > --- a/doc/README.scrapyard > +++ b/doc/README.scrapyard > @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... > > Board Arch CPU removed Commit last known maintainer/contact > ============================================================================= > +cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar > <[email protected]> > mpq101 powerpc mpc85xx - 2011-10-23 Alex Dubov <[email protected]> > ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <[email protected]> > ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris > <[email protected]> > diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h > deleted file mode 100644 > index 70427da..0000000 > --- a/include/configs/cerf250.h > +++ /dev/null > @@ -1,229 +0,0 @@ > -/* > - * (C) Copyright 2002 > - * Kyle Harris, Nexus Technologies, Inc. [email protected] > - * > - * (C) Copyright 2002 > - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> > - * Marius Groeger <[email protected]> > - * > - * Configuation settings for the CERF250 board. > - * > - * See file CREDITS for list of people who contributed to this > - * project. > - * > - * This program is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of > - * the License, or (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License > - * along with this program; if not, write to the Free Software > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > - * MA 02111-1307 USA > - */ > - > -#ifndef __CONFIG_H > -#define __CONFIG_H > - > -/* > - * High Level Configuration Options > - * (easy to change) > - */ > -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ > -#define CONFIG_CERF250 1 /* on Cerf PXA Board */ > -#define CONFIG_BOARD_LATE_INIT > -#define CONFIG_BAUDRATE 38400 > -#define CONFIG_SYS_TEXT_BASE 0x0 > - > -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > - > -/* we will never enable dcache, because we have to setup MMU first */ > -#define CONFIG_SYS_DCACHE_OFF > - > -/* > - * Size of malloc() pool > - */ > -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) > - > -/* > - * Hardware drivers > - */ > -#define CONFIG_SMC91111 > -#define CONFIG_SMC91111_BASE 0x04000300 > -#define CONFIG_SMC_USE_32_BIT > - > -/* > - * select serial console configuration > - */ > -#define CONFIG_PXA_SERIAL > -#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */ > - > -/* allow to overwrite serial and ethaddr */ > -#define CONFIG_ENV_OVERWRITE > - > -/* > - * BOOTP options > - */ > -#define CONFIG_BOOTP_BOOTFILESIZE > -#define CONFIG_BOOTP_BOOTPATH > -#define CONFIG_BOOTP_GATEWAY > -#define CONFIG_BOOTP_HOSTNAME > - > - > -/* > - * Command line configuration. > - */ > -#include <config_cmd_default.h> > - > - > -#define CONFIG_BOOTDELAY 3 > -#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2 > -#define CONFIG_NETMASK 255.255.255.0 > -#define CONFIG_IPADDR 192.168.0.5 > -#define CONFIG_SERVERIP 192.168.0.2 > -#define CONFIG_BOOTCOMMAND "bootm 0xC0000" > -#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 > console=ttyS0,38400" > -#define CONFIG_CMDLINE_TAG > - > -#if defined(CONFIG_CMD_KGDB) > -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ > -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ > -#endif > - > -/* > - * Miscellaneous configurable options > - */ > -#define CONFIG_SYS_HUSH_PARSER 1 > -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " > - > -#define CONFIG_SYS_LONGHELP /* undef to > save memory */ > -#ifdef CONFIG_SYS_HUSH_PARSER > -#define CONFIG_SYS_PROMPT "uboot$ " /* Monitor > Command Prompt */ > -#else > -#define CONFIG_SYS_PROMPT "=> " /* Monitor > Command Prompt */ > -#endif > -#define CONFIG_SYS_CBSIZE 256 /* > Console I/O Buffer Size */ > -#define CONFIG_SYS_PBSIZE > (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) > - > /* Print Buffer Size */ > -#define CONFIG_SYS_MAXARGS 16 /* > max number of command args */ > -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot > Argument Buffer Size */ > -#define CONFIG_SYS_DEVICE_NULLDEV 1 > - > -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on > */ > -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM > */ > - > -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load > address */ > - > -#define CONFIG_SYS_HZ 1000 > -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to > 400/200/100 MHz */ > - > -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } > - > - > -/* > - * Stack sizes > - * > - * The stack sizes are set up in start.S using the settings below > - */ > -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ > -#ifdef CONFIG_USE_IRQ > -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ > -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ > -#endif > - > -/* > - * Physical Memory Map > - */ > -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of > DRAM */ > -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ > -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ > - > -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ > -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ > -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ > -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ > -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors > (x2) */ > - > -#define CONFIG_SYS_DRAM_BASE 0xa0000000 > -#define CONFIG_SYS_DRAM_SIZE 0x04000000 > - > -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 > - > -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + > PHYS_SDRAM_1) > - > -/* > - * GPIO settings > - */ > - > - > -#define CONFIG_SYS_GPSR0_VAL 0x00408030 > -#define CONFIG_SYS_GPSR1_VAL 0x00BFA882 > -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 > -#define CONFIG_SYS_GPCR0_VAL 0xC0031100 > -#define CONFIG_SYS_GPCR1_VAL 0xFC400300 > -#define CONFIG_SYS_GPCR2_VAL 0x00003FFF > -#define CONFIG_SYS_GPDR0_VAL 0xC0439330 > -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB82 > -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF > -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 > -#define CONFIG_SYS_GAFR0_U_VAL 0xA5000010 > -#define CONFIG_SYS_GAFR1_L_VAL 0x60008018 > -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA > -#define CONFIG_SYS_GAFR2_L_VAL 0xAAA0000A > -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 > - > -#define CONFIG_SYS_PSSR_VAL 0x20 > - > -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 > -#define CONFIG_SYS_CKEN 0x0 > - > -/* > - * Memory settings > - */ > -#define CONFIG_SYS_MSC0_VAL 0x12447FF0 > -#define CONFIG_SYS_MSC1_VAL 0x12BC5554 > -#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1 > -#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9 > -#define CONFIG_SYS_MDREFR_VAL 0x03CDC017 > -#define CONFIG_SYS_MDMRS_VAL 0x00000000 > -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 > -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 > - > -/* > - * PCMCIA and CF Interfaces > - */ > -#define CONFIG_SYS_MECR_VAL 0x00000000 > -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 > -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 > -#define CONFIG_SYS_MCATT0_VAL 0x00010504 > -#define CONFIG_SYS_MCATT1_VAL 0x00010504 > -#define CONFIG_SYS_MCIO0_VAL 0x00004715 > -#define CONFIG_SYS_MCIO1_VAL 0x00004715 > - > -#define _LED 0x08000010 /*check this */ > -#define LED_BLANK 0x08000040 > -#define LED_GPIO 0x10 > - > -/* > - * FLASH and environment organization > - */ > -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks > */ > -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on > one chip */ > - > -/* timeout values are in ticks */ > -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for > Flash Erase */ > -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for > Flash Write */ > - > -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* 256 KiB */ > -#define CONFIG_ENV_IS_IN_FLASH 1 > -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + > CONFIG_SYS_MONITOR_LEN) > -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment > Sector */ > - > - > -#endif /* __CONFIG_H */ > -- > 1.7.7.1 > > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
