> Fix warnings for both cases: > > definded CONFIG_SYS_NAND_HW_ECC_OOBFIRST: > nand_spl_simple.c: In function 'nand_read_page': > nand_spl_simple.c:156:6: warning: variable 'stat' set but not used > [-Wunused-but-set-variable] > > not definded CONFIG_SYS_NAND_HW_ECC_OOBFIRST: > nand_spl_simple.c: In function 'nand_read_page': > nand_spl_simple.c:196:6: warning: variable 'stat' set but not used > [-Wunused-but-set-variable] > > Signed-off-by: Anatolij Gustschin <[email protected]> > Cc: Heiko Schocher <[email protected]> > Cc: Scott Wood <[email protected]> > --- > drivers/mtd/nand/nand_spl_simple.c | 6 ++---- > 1 files changed, 2 insertions(+), 4 deletions(-) > > diff --git a/drivers/mtd/nand/nand_spl_simple.c > b/drivers/mtd/nand/nand_spl_simple.c index ed821f2..7eb08a3 100644 > --- a/drivers/mtd/nand/nand_spl_simple.c > +++ b/drivers/mtd/nand/nand_spl_simple.c > @@ -153,7 +153,6 @@ static int nand_read_page(int block, int page, uchar > *dst) int eccbytes = CONFIG_SYS_NAND_ECCBYTES; > int eccsteps = CONFIG_SYS_NAND_ECCSTEPS; > uint8_t *p = dst; > - int stat; > > /* > * No malloc available for now, just use some temporary locations > @@ -176,7 +175,7 @@ static int nand_read_page(int block, int page, uchar > *dst) this->ecc.hwctl(&mtd, NAND_ECC_READ); > this->read_buf(&mtd, p, eccsize); > this->ecc.calculate(&mtd, p, &ecc_calc[i]); > - stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); > + this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); > } > > return 0; > @@ -193,7 +192,6 @@ static int nand_read_page(int block, int page, void > *dst) int eccbytes = CONFIG_SYS_NAND_ECCBYTES; > int eccsteps = CONFIG_SYS_NAND_ECCSTEPS; > uint8_t *p = dst; > - int stat; > > nand_command(block, page, 0, NAND_CMD_READ0); > > @@ -224,7 +222,7 @@ static int nand_read_page(int block, int page, void > *dst) * from correct_data(). We just hope that all possible errors > * are corrected by this routine. > */ > - stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); > + this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); > } > > return 0;
Acked-by: Marek Vasut <[email protected]> _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
