[U-Boot] [PATCH v2 1/6] drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts

[Andreas Müller]

Signed-off-by: Andreas Müller <schnitzelt...@gmx.de>
---
 drivers/i2c/omap24xx_i2c.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 4ae237a..271ed60 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -73,7 +73,7 @@ void i2c_init(int speed, int slaveadd)
                fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM;
                if (((fsscll < 0) || (fssclh < 0)) ||
                    ((fsscll > 255) || (fssclh > 255))) {
-                       printf("Error : I2C initializing first phase clock\n");
+                       puts("Error : I2C initializing first phase clock\n");
                        return;
                }
 
@@ -84,7 +84,7 @@ void i2c_init(int speed, int slaveadd)
                hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM;
                if (((fsscll < 0) || (fssclh < 0)) ||
                    ((fsscll > 255) || (fssclh > 255))) {
-                       printf("Error : I2C initializing second phase clock\n");
+                       puts("Error : I2C initializing second phase clock\n");
                        return;
                }
 
@@ -99,7 +99,7 @@ void i2c_init(int speed, int slaveadd)
                fssclh -= I2C_FASTSPEED_SCLH_TRIM;
                if (((fsscll < 0) || (fssclh < 0)) ||
                    ((fsscll > 255) || (fssclh > 255))) {
-                       printf("Error : I2C initializing clock\n");
+                       puts("Error : I2C initializing clock\n");
                        return;
                }
 
@@ -118,7 +118,7 @@ void i2c_init(int speed, int slaveadd)
        writew(I2C_CON_EN, &i2c_base->con);
        while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) {
                if (timeout <= 0) {
-                       printf("ERROR: Timeout in soft-reset\n");
+                       puts("ERROR: Timeout in soft-reset\n");
                        return;
                }
                udelay(1000);
@@ -284,13 +284,13 @@ int i2c_read(uchar chip, uint addr, int alen, uchar 
*buffer, int len)
        }
 
        if (addr + len > 256) {
-               printf("I2C read: address out of range\n");
+               puts("I2C read: address out of range\n");
                return 1;
        }
 
        for (i = 0; i < len; i++) {
                if (i2c_read_byte(chip, addr + i, &buffer[i])) {
-                       printf("I2C read: I/O error\n");
+                       puts("I2C read: I/O error\n");
                        i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
                        return 1;
                }
-- 
1.7.6.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot