Dear Stefano Babic, In message <[email protected]> you wrote: > > >>> make uImage LOADADDR=0x70008000 > >> > >> Exactly, I do the same. > > > > Before, you wrote you were using 0x80008000 ... > > No, I don't: I wrote that I am using 0x80008000 for MX3. Fabio wrote the > example for MX53, and the value is correct (0x70008000). And for MX51 we > have another one (on the MX51 the RAM starts at address 0x90000000). > > There is no a general load address for all IMX SOCs.
I'm aware of this. But this was what Fabio quoted from the Linux messages: > > Kernel: arch/arm/boot/Image is ready > > Kernel: arch/arm/boot/zImage is ready > > multiple load addresses: 0x80008000 0x80008000 0x10008000 This does not list 0x70008000 as an option (instead it lists 0x80008000 twice?). So is this a bug in / deficiency of the Linux kernel? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Philosophy: A route of many roads leading from nowhere to nothing. - Ambrose Bierce _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
