> > > IFC NAND Machine calculates ECC on 512byte sector. Same is taken care > > > in > > > fsl_ifc_run_command() while ECC status verification. Here buffer > > > number is calculated assuming 512byte sector and same is passed to > > > > is_blank. > > > > > However in is_blank() buffer address is calculated using > > > mdt->writesize which is wrong. It should be calculated on basis of ecc > > > > sector size. > > > > > Also, in fsl_ifc_run_command() bufferpage is calculated on the basis > > > of ecc sector size instead of hard coded value. > > > > > > Signed-off-by: Poonam Aggrwal <poonam.aggr...@freescale.com> > > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > > > > You just sent two patches based on the same commit, but those are clearly > > dependent. This is weird. So next time: > > > > 1) Submit this with git-send-email as a series > > I will take care this point in future > > > 2) iomem looks linuxish, so instead of specifying u-boot commit, specify > > Linux commit/tree etc. from where this is pulled so when someone synces > > next time, he'll know where he is in linux. > > This patch is independent of Linux tree. I will float similar patch to > Linux tree. > > > 3) Cc Scott Wood > > I will take care this point in future > > --Prabhakar
Awesome, good going, thanks! M _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot