On 01/04/2012 09:10 AM, Grant Erickson wrote: > On Jan 3, 2012, at 6:31 AM, Tom Rini wrote: >> On 12/22/2011 12:28 PM, Grant Erickson wrote: >>> Only attempt to configure and add DRAM at chip select 1 if the board has >>> configured more than one bank of DRAM. >>> >>> This prevents boards that have CONFIG_NR_DRAM_BANKS set to 1 from getting >>> an incorrect DRAM size. >>> >>> Signed-off-by: Grant Erickson <maratho...@gmail.com> >>> Cc: Tom Rini <tr...@ti.com> >> >> OK, what problem (and on what board) are you seeing? Many boards only >> have CS0 populated with DRAM but when we try and configure CS1 the >> mem_ok() call fails and we don't try and use it, so we don't get a wrong >> amount of memory. Thanks! > > Tom: > > This is on an OMAP3EVM-derived board with 64 MiB of fixed Micron MDDR DRAM. > > The board is bootstrapped in second stage boot using X-Loader 1.46 (it'll > move to U-Boot SPL really soon now). The original X-Loader 1.46 + U-Boot > 2010.09 went successfully as follows:
X-Loader is misbehaving (and misconfiguring) here. Actual OMAP3EVMs also had this problem until the SPL switch. -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
