> -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of JR Rivers > Sent: Thursday, January 12, 2012 6:49 AM > To: [email protected] > Subject: Re: [U-Boot] bootm not taking dtb > > > Ping > > On Jan 11, 2012, at 1:47 PM, JR Rivers wrote: > > > > > I am working with a powerpc embedded system where u-boot seems to be > passing in a constructed fdt (or one embedded in u-boot) as opposed to > one that is either passed directly to bootm or as the third image of a > multi-file image. > > > > I'm sure sure that the system is NOT using my dtb file because I > modified the my linux platform file to print out the "model" and > "compatible" properties of root, and they make sense, but are not the > values that I pass in with my dtb. > > > > I've tried "bootm ${kerneladdr} - ${dtbaddr}" for nfs boot, and I've > constructed a multi-file uImage with kernel:initramfs:dtb. The behavior > is the same in all cases. Is this expected behavior, and if so, is there > some way to force u-boot to use my dtb file? Did you check that $(dtb_addr) is same as the location where your dtb is there. I know this is trivial question I am asking. Also can you specify which board and which u-boot version. I am assuming you are talking about Denx top of tree. > > > > Thanks, > > > > JR > > > > > > > > > > > > > > _______________________________________________ > > U-Boot mailing list > > [email protected] > > http://lists.denx.de/mailman/listinfo/u-boot > > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
