> This patch set refactors mxc_spi as described in > http://lists.denx.de/pipermail/u-boot/2010-March/068791.html > and requested in > http://lists.denx.de/pipermail/u-boot/2012-January/116023.html > in order to add support for the MX6Q in general and the mx6qsabrelite > specifically. > > Patch 1 simply moves the conditional parts of mxc_spi.c into the > respective CPU-specific imx-regs.h files. > > Patch 2 adds general support for SPI to the i.MX6. > > Patch 3 adds support to the mx6qsabrelite board > > Patch 4 modifies the 'sf' command to allow a default chip-select > to be specified by board headers as is done on efika et al. This allows > a bare 'sf' probe command: > U-Boot> sf probe > instead of the more cumbersome usage when a GPIO is tacked onto > the chip-select. Otherwise, this command-line would be needed > to specify GP3:19 on SabreLite: > U-Boot> sf probe 0x5300 > > Patch 5 adds default chip-select values for mx6qsabrelite platform. > > Patch 6 adds reference macros for use in storing the environment > in serial flash to match the use on Freescale's U-Boot release > > This patch set has been compiled against the following configurations, > but only tested on mx6qsabrelite: > mx6qsabrelite > mx51evk > mx31pdk > mx35pdk
Muhehehe ... time for a little review-torture :-) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
