On Wed, Feb 1, 2012 at 1:52 AM, Eric Nelson <eric.nel...@boundarydevices.com> wrote: > Signed-off-by: Eric Nelson <eric.nel...@boundarydevices.com> > Acked-by: Dirk Behme <dirk.be...@de.bosch.com> > Acked-by: Stefano Babic <sba...@denx.de> > --- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 2 +- > include/configs/mx6qsabrelite.h | 2 ++ > 2 files changed, 3 insertions(+), 1 deletions(-)
Acked-by: Jason Liu <jason....@linaro.org> Tested on Sabre-lite board. Tested-by: Jason Liu <jason....@linaro.org> > > diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > index 97a77e8..03a088a 100644 > --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > @@ -208,7 +208,7 @@ iomux_v3_cfg_t ecspi1_pads[] = { > > void setup_spi(void) > { > - gpio_direction_output(GPIO_NUMBER(3, 19), 1); > + gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1); > imx_iomux_v3_setup_multiple_pads(ecspi1_pads, > ARRAY_SIZE(ecspi1_pads)); > } > diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h > index bcb1a42..2286bb0 100644 > --- a/include/configs/mx6qsabrelite.h > +++ b/include/configs/mx6qsabrelite.h > @@ -49,6 +49,8 @@ > #define CONFIG_SPI_FLASH > #define CONFIG_SPI_FLASH_SST > #define CONFIG_MXC_SPI > +#define CONFIG_SF_DEFAULT_BUS 0 > +#define CONFIG_SF_DEFAULT_CS (0|(GPIO_NUMBER(3, 19)<<8)) > #define CONFIG_SF_DEFAULT_SPEED 25000000 > #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) > #endif > -- > 1.7.1 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot