From: "Govindraj.R" <govindraj.r...@ti.com>
For panda initialise the mux pins for ehci usage and
enable ehci in omap4_panda config file.
Signed-off-by: Govindraj.R <govindraj.r...@ti.com>
---
board/ti/panda/panda_mux_data.h | 16 ++++++++--------
include/configs/omap4_panda.h | 23 ++++++++++++++++++++++-
2 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 2970ccd..5b66a14 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -136,14 +136,14 @@ const struct pad_conf_entry
core_padconf_array_non_essential[] = {
{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /*
cam_shutter */
{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /*
cam_strobe */
{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /*
gpio_83 */
- {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /*
hsi1_cawake */
- {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /*
hsi1_cadata */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /*
hsi1_caflag */
- {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /*
hsi1_acready */
- {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /*
hsi1_acwake */
- {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /*
hsi1_acdata */
- {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /*
hsi1_acflag */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /*
hsi1_caready */
+ {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/*
usbb1_ulpiphy_clk */
+ {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /*
usbb1_ulpiphy_stp */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dir */
+ {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_nxt */
+ {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dat0 */
+ {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dat1 */
+ {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dat2 */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dat3 */
{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dat4 */
{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dat5 */
{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /*
usbb1_ulpiphy_dat6 */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 416eb39..b4756be 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -31,12 +31,33 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_PANDA 1 /* working with Panda */
+#define CONFIG_PANDA /* working with Panda */
+
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+#define CONFIG_UBOOT_ENABLE_PADS_ALL
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
#define CONFIG_USB_ULPI
#define CONFIG_USB_ULPI_VIEWPORT_OMAP
#include <configs/omap4_common.h>
+#define CONFIG_CMD_NET
/* GPIO */
#define CONFIG_CMD_GPIO
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
