Hi Peter, On Mon, Feb 13, 2012 at 1:52 PM, Peter Meerwald <pme...@pmeerw.net> wrote: > Hello, > > the recent OMAP USB changes (43b62393da6dfdd7f503d1b37344463a05ea47b5, > 29321c0518d99494ab2a250e5b4f75b3add83b11) fail on beagleboard-xm rev. C, > see below
The errors have nothing to do with ehci patch merges, (I had tested it on beagle rev c board before posting it out) Looking into it closely the below two patches are causing this issue: [...] commit 498cbdfe62a8330f6c89765bdd15e60328a26511 Author: Patil, Rachna <rac...@ti.com> Date: Sun Jan 22 23:46:23 2012 +0000 ARM: AM33XX: Add AM33XX I2C driver support commit 2faa76196af4b3e93bcb9e38ed9090cbd3b06db3 Author: Patil, Rachna <rac...@ti.com> Date: Sun Jan 22 23:44:12 2012 +0000 ARM: I2C: I2C Multi byte address support [...] Reverting these two patches I don't see these errors on my beagle rev c board logs as in here [1] btw, usb error printed is a musb error not the ehci host error. -- Thanks, Govindraj.R [1]: U-Boot SPL 2011.12-00325-g146ff78 (Feb 13 2012 - 14:18:55) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 timed out in wait_for_bb: I2C_STAT=1000 reading u-boot.img reading u-boot.img U-Boot 2011.12-00325-g146ff78 (Feb 13 2012 - 14:18:55) OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #79e200229ff800000163810c0d021023 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 OMAP3 beagleboard.org # OMAP3 beagleboard.org # setenv usbethaddr 0:0:1:2:3:4;usb start; (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # > > regards, p. > > > > U-Boot SPL 2011.12-00326-gdda8078 (Feb 13 2012 - 09:15:55) > Texas Instruments Revision detection unimplemented > OMAP SD/MMC: 0 > timed out in wait_for_status_mask: I2C_STAT=1010 > timed out in wait_for_status_mask: I2C_STAT=1010 > reading u-boot.img > reading u-boot.img > > > U-Boot 2011.12-00326-gdda8078 (Feb 13 2012 - 09:15:55) > > OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > timed out in wait_for_status_mask: I2C_STAT=1410 > TWL4030:USB:Write[0xfd] Error 1 > timed out in wait_for_status_mask: I2C_STAT=1410 > TWL4030:USB:Write[0xfe] Error 1 > timed out in wait_for_status_mask: I2C_STAT=1410 > TWL4030:USB:Write[0xfe] Error 1 > > > > -- > > Peter Meerwald > +43-664-2444418 (mobile) > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot