Because the tricorder uses the CONFIG_OMAP_HSMMC the
initialization command is mmc rescan and not mmc init.
Signed-off-by: Thomas Weber <we...@corscience.de>
---
include/configs/tricorder.h | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index a2bff2b..1ef0d43 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -161,6 +161,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyO2,115200n8\0" \
+ "mmcdev=0\0"
"vram=12M\0" \
"lcdmode=800x600\0" \
"defaultdisplay=lcd\0" \
@@ -183,10 +184,10 @@
"root=ubi0:rootfs " \
"rootfstype=ubifs " \
"${kernelopts}\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
"eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
@@ -195,7 +196,7 @@
"run nandargs; " \
"nand read ${loadaddr} 280000 400000; " \
"bootm ${loadaddr}\0" \
- "autoboot=if mmc init 0; then " \
+ "autoboot=if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
--
1.7.8.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
