On 2/23/2012 8:12 PM, Stefan Roese wrote:
Hi Pavel,
Hello Pavel,
(Added Amit to Cc).
On Thursday 23 February 2012 15:17:19 Pavel Machek wrote:
Is there git tree with u-boot for SPEAr1310 somewhere? I only seen
patches from 2010...
Here a link to the ST git repository:
git://stlinux.com/spear/u-boot.git
Most branches are not based on current mainline U-Boot version though. ST
people might have a better overview here.
Please note that there is currently ongoing effort to port much of this
repository into mainline. From ST and from myself. Stay tuned. The list should
see some updates quite soon...
Please don't hesitate if you have any specific questions.
Is there easy way to flash resulting u-boot using
BDI?
My experience is mostly SPEAr600 only right now. Not sure if there are bigger
differences between those SoC's in the BootROM. SPEAr600 uses XLoader as SPL.
The case is same with spear1310. It needs an Xloader to boot. The
differences are a dual core CortexA9 CPU and more peripherals.
The uboot present at "git://stlinux.com/spear/u-boot.git" supports
spear1310.
Please have a look and revert back if you have any doubt
I ported U-Boot SPL for SPEAr600 though, completely obsoleting XLoader.
Patches are not quite ready for the list though.
Thanks Stefan. I have been thinking of doing the same for a long time now.
Regards
Vipin'
Best regards,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk& Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de
.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
