Hi,
I have Uboot loaded in my Coldire processor.
My Kernel build for uClinux finally created few files (image.bin
linux.bin romfs.img romfs-inst.log) in the images folder and copied
image.bin to the /tftp of my system.
So, I think image.bin is the one which will be loaded in my coldfire board.
But when I tried load it (by TeraTerm) in coldfire with below u-boot
commands(tftp and bootm), it fails with error:
-> tftp 0x41000000 uImage-5329 (renamed image.bin )
-> bootm 0x41000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Can you please tell me how to make this binary loadable by uboot?
my u-boot version is below:
U-Boot 2008.10 (Dec 15 2008 - 11:03:39)
CPU: Freescale MCF5329 (Mask:54 Version:2)
CPU CLK 240 MHz BUS CLK 80 MHz
Board: Freescale FireEngine 5329 EVB
I2C: ready
DRAM: 32 MB
FLASH: 2 MB
In: serial
Out: serial
Err: serial
NAND: 16 MiB
Net: FEC0
Thnaks & Regards,
Manish
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
