This is needed to support Freescale-supplied userspaces. At the moment, both the IPU and VPU libraries provided by Freescale in the "imx-lib" package contain routines which scrape the system revision from /proc/cpuinfo. In the VPU library, this information is used to load the proper firmware, allowing a single binary to be used across various i.MX processors.
V3 removes the conditional surrounding get_board_rev() as requested by Marek. Signed-off-by: Eric Nelson <[email protected]> --- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 5 +++++ include/configs/mx6qsabrelite.h | 1 + 2 files changed, 6 insertions(+), 0 deletions(-) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 7fe2dc9..1d09a72 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -215,6 +215,11 @@ int board_mmc_init(bd_t *bis) } #endif +u32 get_board_rev(void) +{ + return 0x63000 ; +} + #ifdef CONFIG_MXC_SPI iomux_v3_cfg_t ecspi1_pads[] = { /* SS1 */ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index bb3a46b..a1a2267 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -33,6 +33,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) -- 1.7.9 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
