On 03/19/2012 03:12 PM, Grazvydas Ignotas wrote:
According to OMAP3 TRM, when the controller reports certain errors,
driver must perform a software reset. This is done by setting a bit
in SYSCTL and waiting it to clear:
- SRC on command timeout (CTO)
- SRD on data errors (DTO, DCRC and DEB)
This fixes a problem seen on OMAP3 pandora board with some cards
that won't work with a message printed multiple times:
timedout waiting on cmd inhibit to clear
Code loosely based on Linux omap_hsmmc driver.
Signed-off-by: Grazvydas Ignotas<nota...@gmail.com>
Most excellent! Pali, can you try this on N900 and see if that helps
out the problem you were having as well?
Andy, I'll give this a spin through the boards I've got here but I'd
like this to go, via your tree, into u-boot/master assuming all goes well.
--
Tom
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
