Dear Stefano Babic, > On 19/03/2012 23:36, Fabio Estevam wrote: > > Add proper IO accessors for mx6 usb registers. > > > > Signed-off-by: Fabio Estevam <[email protected]> > > --- > > This patch depends on "[PATCH v5] mx6: Read silicon revision from > > register" > > > > drivers/usb/host/ehci-mx6.c | 13 ++++--------- > > 1 files changed, 4 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c > > index b7bf49d..5dec673 100644 > > --- a/drivers/usb/host/ehci-mx6.c > > +++ b/drivers/usb/host/ehci-mx6.c > > @@ -46,13 +46,9 @@ > > > > #define USBPHY_CTRL_ENUTMILEVEL3 0x00008000 > > #define USBPHY_CTRL_ENUTMILEVEL2 0x00004000 > > > > -#define ANADIG_USB2_CHRG_DETECT 0x00000210 > > > > #define ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000 > > #define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000 > > > > -#define ANADIG_USB2_PLL_480_CTRL 0x00000020 > > -#define ANADIG_USB2_PLL_480_CTRL_SET 0x00000024 > > -#define ANADIG_USB2_PLL_480_CTRL_CLR 0x00000028 > > > > #define ANADIG_USB2_PLL_480_CTRL_BYPASS 0x00010000 > > #define ANADIG_USB2_PLL_480_CTRL_ENABLE 0x00002000 > > #define ANADIG_USB2_PLL_480_CTRL_POWER 0x00001000 > > > > @@ -77,8 +73,7 @@ static void usbh1_internal_phy_clock_gate(int on) > > > > static void usbh1_power_config(void) > > { > > > > - void __iomem *anatop_base = (void __iomem *)ANATOP_BASE_ADDR; > > - > > + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; > > > > /* > > > > * Some phy and power's special controls for host1 > > * 1. The external charger detector needs to be disabled > > > > @@ -89,15 +84,15 @@ static void usbh1_power_config(void) > > > > */ > > > > __raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B | > > > > ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B, > > > > - anatop_base + ANADIG_USB2_CHRG_DETECT); > > + &anatop->usb2_chrg_detect); > > > > __raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS, > > > > - anatop_base + ANADIG_USB2_PLL_480_CTRL_CLR); > > + &anatop->usb2_pll_480_ctrl); > > > > __raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE | > > > > ANADIG_USB2_PLL_480_CTRL_POWER | > > ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS, > > > > - anatop_base + ANADIG_USB2_PLL_480_CTRL_SET); > > + &anatop->usb2_pll_480_ctrl_set); > > > > } > > > > static int usbh1_phy_enable(void) > > Acked-by: Stefano Babic <[email protected]> > Agreed
Acked-by: Marek Vasut <[email protected]> Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
