On 30 March 2012 10:23, Donghwa Lee <[email protected]> wrote: > Hi, > On 29 March 2012 23:37, Minkyu Kang wrote: > >> Dear Donghwa, >> >> On 29 March 2012 17:50, Donghwa Lee <[email protected]> wrote: >>> This is definition of system registers for EXYNOS SoC. >>> >>> Signed-off-by: Donghwa Lee <[email protected]> >>> Signed-off-by: Kyungmin Park <[email protected]> >>> --- >>> arch/arm/include/asm/arch-exynos/cpu.h | 2 + >>> arch/arm/include/asm/arch-exynos/system.h | 51 >>> +++++++++++++++++++++++++++++ >>> 2 files changed, 53 insertions(+), 0 deletions(-) >>> create mode 100644 arch/arm/include/asm/arch-exynos/system.h >>> >>> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h >>> b/arch/arm/include/asm/arch-exynos/cpu.h >>> index 89f2c2e..70048f0 100644 >>> --- a/arch/arm/include/asm/arch-exynos/cpu.h >>> +++ b/arch/arm/include/asm/arch-exynos/cpu.h >>> @@ -29,6 +29,7 @@ >>> /* EXYNOS4 */ >>> #define EXYNOS4_GPIO_PART3_BASE 0x03860000 >>> #define EXYNOS4_PRO_ID 0x10000000 >>> +#define EXYNOS4_SYSREG_BASE 0x10010000 >>> #define EXYNOS4_POWER_BASE 0x10020000 >>> #define EXYNOS4_SWRESET 0x10020400 >>> #define EXYNOS4_CLOCK_BASE 0x10030000 >> >> need base address of exynos5 also. >> > > > SYSREG_BASE address of exynos5 was already included in this file.
OK. > >> >> Where is it use? >> Need codes for using it. >> > > This is used to control various signal of exynos. For example, it can contorl > to FIMD of LBLK0 bypass selection. If so, please post it together. This patch shouldn't be applied alone. Minkyu Kang. -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
