Dear Anatolij Gustschin, > Hi Marek, > > On Sat, 31 Mar 2012 19:47:15 +0200 > > Marek Vasut <[email protected]> wrote: > > Signed-off-by: Marek Vasut <[email protected]> > > --- > > > > README | 7 ------- > > 1 files changed, 0 insertions(+), 7 deletions(-) > > > > diff --git a/README b/README > > index c98afa7..0ebe877 100644 > > --- a/README > > +++ b/README > > > > @@ -3379,10 +3379,6 @@ Low Level (hardware related) configuration options: > > and crc32 is the correct crc32 which the > > area should have. > > > > -- CONFIG_LOOPW > > - Add the "loopw" memory command. This only takes effect if > > - the memory commands are activated globally (CONFIG_CMD_MEM). > > Please, no. CONFIG_LOOPW is used if CONFIG_CMD_MEMORY is defined. This > text should be fixed instead: s/CONFIG_CMD_MEM/CONFIG_CMD_MEMORY/
DAMN, it's not CONFIG_CMD ... scrap this patch, good catch! > > Also it probably makes sense to change CONFIG_LOOPW to CONFIG_CMD_LOOPW > since this configures an U-Boot command. Agreed! > > Same for CONFIG_MX_CYCLIC. Yes. > > ... > > > @@ -3394,9 +3390,6 @@ Low Level (hardware related) configuration options: > > => mwc.l 100 12345678 10 > > This command will write 12345678 to address 100 all 10 ms. > > > > - This only takes effect if the memory commands are activated > > - globally (CONFIG_CMD_MEM). > > - > > Same applies here. > > Thanks, > Anatolij Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
