Dear Stefano Babic, > On 02/04/2012 21:00, Ilya Yanok wrote: > > Hi Marek, Stefano, > > Hi Marek, > > > On 02.04.2012 21:29, Marek Vasut wrote: > >>> In our setup (OMAP3 EHCI host, keyboard, mouse mass storage and BT > >>> dongle devices connected via several hubs) keyboard fails to initialize > >>> during the bus scan (stalled endpoint while get_descriptor/64) and > >>> after that keyboard is unusable (even in Linux) until power off/on. > >>> > >>> Increasing the delay after port reset from 200ms to 260ms solves this > >>> problem. > >> > >> Do we still have this problem? > > > > Sorry, I'm not working with this board any more. I'm ccing Stefano, > > probably he can answer. > > USB seems not working on this board, but the patch does not help. No > peripheral are found after bus scan, even if the delay is increased by > the patch. I will suggest to not apply this patch for the release and I > will try to investigate what is gone wrong on this board. > > Best regards, > Stefano Babic
Ok, discarding from patchwork. Thanks! Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
