Dear Fabio Estevam, > Hi, > > I am able to successfully boot a zImage kernel with latest 2012.04 > U-boot on mx28evk.
Oh I'm so dead :-( > Now I want to boot a dt zImage version. > > These are the steps I am doing: > > make menuconfig and select [*] Support MXS platforms from device tree > > make imx28-evk.dtb > > make > > cat arch/arm/boot/imx28-evk.dtb arch/arm/boot/zImage > > arch/arm/boot/zImage_dtb > > cp arch/arm/boot/zImage_dtb /tftpboot/zImage > > Then I get the following result: > > U-Boot 2012.04-00001-ga1f2367-dirty (Apr 23 2012 - 10:01:52) > > Freescale i.MX28 family at 454 MHz > DRAM: 128 MiB > MMC: MXS MMC: 0 > In: serial > Out: serial > Err: serial > Net: FEC0, FEC1 > Hit any key to stop autoboot: 0 > BOOTP broadcast 1 > BOOTP broadcast 2 > DHCP client bound to address 10.29.244.54 > Using FEC0 device > TFTP from server 10.29.240.143; our IP address is 10.29.244.54 > Filename 'zImage'. > Load address: 0x42000000 > Loading: ## Warning: gatewayip needed but not set > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################## > done > Bytes transferred = 2250927 (2258af hex) > Bad Linux ARM zImage magic! > > Any idea of why this is failing? Dunno, maybe you need further patch? > Thanks, > > Fabio Estevam Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot