UBI error: ubi_read_volume_table: the layout volume was not found Error after executing and interrupting nandtest:
nandtest -p 100 /dev/mtd5 Creating 6 MTD partitions on "atmel_nand": 0x000000000000-0x000000020000 : "bootstrap" 0x000000020000-0x000000060000 : "uboot" 0x000000060000-0x000000080000 : "env1" 0x000000080000-0x0000000a0000 : "env2" 0x0000000a0000-0x0000002a0000 : "linux" 0x0000002a0000-0x000020000000 : "root" UBI: attaching mtd5 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 137574 UBI error: ubi_read_volume_table: the layout volume was not found UBI error: ubi_init: cannot attach mtd5 MACB_mii_bus: probed eth0: no PHY found udc: at91_udc version 3 May 2006 mousedev: PS/2 mouse device common for all mice rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0 Driver for 1-wire Dallas network protocol. w1-gpio: probe of w1-gpio failed with error -16 AT91SAM9 Watchdog enabled (heartbeat=15 sec, nowayout=0) cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 input: gpio-keys as /devices/platform/gpio-keys/input/input0 rtc-at91sam9 at91_rtt.0: setting system clock to 2004-07-22 18:23:15 UTC (1090520595) atmel_mci atmel_mci: version: 0x210 atmel_mci atmel_mci: using PDC atmel_mci atmel_mci: Atmel MCI controller at 0xfffa8000 irq 9, 1 slots VFS: Cannot open root device "ubi0_0" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: 1f00 128 mtdblock0 (driver?) 1f01 256 mtdblock1 (driver?) 1f02 128 mtdblock2 (driver?) 1f03 128 mtdblock3 (driver?) 1f04 2048 mtdblock4 (driver?) 1f05 521600 mtdblock5 (driver?) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [<c000d48c>] (unwind_backtrace+0x0/0xec) from [<c025df24>] (panic+0x60/0x1a4) [<c025df24>] (panic+0x60/0x1a4) from [<c0328c18>] (mount_block_root+0x25c/0x2b4) [<c0328c18>] (mount_block_root+0x25c/0x2b4) from [<c0328d68>] (prepare_namespace+0x8c/0x180) [<c0328d68>] (prepare_namespace+0x8c/0x180) from [<c0328288>] (kernel_init+0xe8/0x120) [<c0328288>] (kernel_init+0xe8/0x120) from [<c0009cd4>] (kernel_thread_exit+0x0/0x8)
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
