Hi Michael,
On Sat, May 26, 2012 at 02:27:01AM +0200, Michael Walle wrote:
> Change the prototype of kirkwood_mpp_conf() from
> void kirkwood_mpp_conf(u32 *mpp_list)
> to
> void kirkwood_mpp_conf(const u32 *mpp_list)
>
> Now we can declare the kwmpp_config static and const where possible.
>
> Signed-off-by: Michael Walle <[email protected]>
> Cc: Prafulla Wadaskar <[email protected]>
> Cc: Simon Guinot <[email protected]>
> Cc: Jason Cooper <[email protected]>
> Cc: Siddarth Gore <[email protected]>
> Cc: Eric Cooper <[email protected]>
> Cc: Stefan Herbrechtsmeier <[email protected]>
> Cc: Valentin Longchamp <[email protected]>
> ---
>
> This was spotted by Mike in an earlier patch series (Kirkwood: add lschlv2
> and lsxhl board support). Declaring the mpp_config static avoids generating
> the array on the stack.
> This was compile tested on all kirkwood boards and tested on the lschlv2.
>
>
> arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 2 +-
> arch/arm/include/asm/arch-kirkwood/mpp.h | 2 +-
> board/LaCie/net2big_v2/net2big_v2.c | 2 +-
> board/LaCie/netspace_v2/netspace_v2.c | 2 +-
> board/Marvell/dreamplug/dreamplug.c | 2 +-
> board/Marvell/guruplug/guruplug.c | 2 +-
> board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +-
> board/Marvell/openrd/openrd.c | 2 +-
> board/Marvell/rd6281a/rd6281a.c | 2 +-
> board/Marvell/sheevaplug/sheevaplug.c | 2 +-
> board/Seagate/dockstar/dockstar.c | 2 +-
> board/buffalo/lsxl/lsxl.c | 2 +-
> board/d-link/dns325/dns325.c | 2 +-
> board/keymile/km_arm/km_arm.c | 2 +-
> 14 files changed, 14 insertions(+), 14 deletions(-)
NACK. At least in this version. Please double check all the kirkwood
boards (taken from boards.cfg):
pogo_e02 arm arm926ejs -
cloudengines kirkwood
dns325 arm arm926ejs - d-link
kirkwood
km_kirkwood arm arm926ejs km_arm
keymile kirkwood km_kirkwood:KM_DISABLE_PCI
km_kirkwood_pci arm arm926ejs km_arm
keymile kirkwood km_kirkwood:KM_RECONFIG_XLX
mgcoge3un arm arm926ejs km_arm
keymile kirkwood
portl2 arm arm926ejs km_arm
keymile kirkwood
inetspace_v2 arm arm926ejs netspace_v2 LaCie
kirkwood lacie_kw:INETSPACE_V2
net2big_v2 arm arm926ejs net2big_v2 LaCie
kirkwood lacie_kw:NET2BIG_V2
netspace_max_v2 arm arm926ejs netspace_v2 LaCie
kirkwood lacie_kw:NETSPACE_MAX_V2
netspace_v2 arm arm926ejs netspace_v2 LaCie
kirkwood lacie_kw:NETSPACE_V2
dreamplug arm arm926ejs -
Marvell kirkwood
guruplug arm arm926ejs -
Marvell kirkwood
mv88f6281gtw_ge arm arm926ejs -
Marvell kirkwood
openrd_base arm arm926ejs openrd
Marvell kirkwood openrd:BOARD_IS_OPENRD_BASE
openrd_client arm arm926ejs openrd
Marvell kirkwood openrd:BOARD_IS_OPENRD_CLIENT
openrd_ultimate arm arm926ejs openrd
Marvell kirkwood openrd:BOARD_IS_OPENRD_ULTIMATE
rd6281a arm arm926ejs -
Marvell kirkwood
sheevaplug arm arm926ejs -
Marvell kirkwood
ib62x0 arm arm926ejs ib62x0
raidsonic kirkwood
dockstar arm arm926ejs -
Seagate kirkwood
I have noticed that board ib62x0 is not in this patch. I have tested
this patch with my ib62x0 board and it works. This is the patch I have
added:
diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
index 65f2c2e..f888901 100644
--- a/board/raidsonic/ib62x0/ib62x0.c
+++ b/board/raidsonic/ib62x0/ib62x0.c
@@ -42,7 +42,7 @@ int board_early_init_f(void)
IB62x0_OE_LOW, IB62x0_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
- u32 kwmpp_config[] = {
+ static const kwmpp_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
Also you should note that this patch should be applied after your
patches for lsxl board.
Regards,
Luka
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
