Hi Anatolij,
On 5/25/2012 18:59, Anatolij Gustschin wrote:
From: Bo Shen<[email protected]>
The new Atmel SoC (at91sam9x5 series and at91sam9n12) add a totally
different LCD controller. Add this new driver to support it.
Using CONFIG_ATMEL_HLCD (distinguish with CONFIG_ATMEL_LCD) to enable
this in board configuration file.
Signed-off-by: Bo Shen<[email protected]>
Signed-off-by: Anatolij Gustschin<[email protected]>
---
Changes since v2:
- rebase on current tree
- convert to use struct for register offsets
- fix indentation in header file
- slightly revise commit log
drivers/video/Makefile | 1 +
drivers/video/atmel_hlcdfb.c | 211 ++++++++++++++++++++++++++++++++++++++
include/atmel_hlcdc.h | 231 ++++++++++++++++++++++++++++++++++++++++++
include/lcd.h | 3 +-
4 files changed, 445 insertions(+), 1 deletions(-)
create mode 100644 drivers/video/atmel_hlcdfb.c
create mode 100644 include/atmel_hlcdc.h
Verified on Atmel SoC. It works well.
Thanks
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
