On Wed, May 23, 2012 at 15:13, Simon Glass wrote:
> HI Donghwa,
>
> On Wed, May 23, 2012 at 12:39 AM, Donghwa Lee <[email protected]
> <mailto:[email protected]>> wrote:
>
> Dear, Simon Glass
>
> I am preparing device tree in Exynos SoC and had already tested by using
> CONFIG_OF_SEPARATE. But, I couldn't test by using CONFIG_OF_EMBED because
> it has a compiler problem to make a binary in the dts/Makefile.
>
> When I had used configuration as seaboard that I had changed configuration
> from CONFIG_OF_SEPARATE to CONFIG_OF_EMBED, it had a same problem.
>
> How did you test in seaboard as it embedded? Is there any more
> configuration
> to compile ebedded option?
>
>
> Can you please send me the compiler output - then I can help with this.
>
> I do use embedded for testing only. But there is an alignment patch which is
> needed and was NAKed. So it is not reliable at present.
>
>
>
> please reply my question.
>
> Thank you,
> Donghwa Lee
>
>
> Regards,
> Simon
>
Dear, Simon Glass
Thank you for your reply. Below log is my compiler problem that was stopped
while objcopy.
# We want the output format and arch.
# We also hope to win a prize for ugliest Makefile / shell interaction
# We look in the LDSCRIPT first.
# Then try the linker which should give us the answer.
# Then check it worked.
oformat=`cat | sed -r -n 's/^OUTPUT_FORMAT[ ("]*([^")]*).*/\1/p'` ;\
oarch=`cat | sed -r -n 's/^OUTPUT_ARCH[ ("]*([^")]*).*/\1/p'` ;\
\
[ -z ${oformat} ] && \
oformat=`/opt/tools/gcc-linaro-arm-linux-gnueabi-2012.04-20120426_linux/bin/arm-linux-gnueabi-gcc
-g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__
-DCONFIG_SYS_TEXT_BASE=0x63300000
-I/home/leedonghwa/project/mainline/u-boot-trats/include -fno-builtin
-ffreestanding -nostdinc -isystem
/opt/tools/gcc-linaro-arm-linux-gnueabi-2012.04-20120426_linux/bin/../lib/gcc/arm-linux-gnueabi/4.7.1/include
-pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork
-march=armv5 -Wall -Wstrict-prototypes -fno-stack-protector
-Wno-format-nonliteral -Wno-format-security -fstack-usage -Wl,--verbose 2>&1 |
sed -r -n 's/^OUTPUT_FORMAT[ ("]*([^")]*).*/\1/p'` ;\
[ -z ${oarch} ] && \
oarch=`/opt/tools/gcc-linaro-arm-linux-gnueabi-2012.04-20120426_linux/bin/arm-linux-gnueabi-gcc
-g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__
-DCONFIG_SYS_TEXT_BASE=0x63300000
-I/home/leedonghwa/project/mainline/u-boot-trats/include -fno-builtin
-ffreestanding -nostdinc -isystem
/opt/tools/gcc-linaro-arm-linux-gnueabi-2012.04-20120426_linux/bin/../lib/gcc/arm-linux-gnueabi/4.7.1/include
-pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork
-march=armv5 -Wall -Wstrict-prototypes -fno-stack-protector
-Wno-format-nonliteral -Wno-format-security -fstack-usage -Wl,--verbose 2>&1 |
sed -r -n 's/^OUTPUT_ARCH[ ("]*([^")]*).*/\1/p'` ;\
\
[ -z ${oformat} ] && \
echo "Cannot read OUTPUT_FORMAT from lds file " && \
exit 1 || true ;\
[ -z ${oarch} ] && \
echo "Cannot read OUTPUT_ARCH from lds file " && \
exit 1 || true ;\
\
cd ./ && \
/opt/tools/gcc-linaro-arm-linux-gnueabi-2012.04-20120426_linux/bin/arm-linux-gnueabi-objcopy
-I binary -O ${oformat} -B ${oarch} \
dt.dtb dt.o
And I have one more question about passing *.dtb to kernel.
I had make a .dtb binary by using CONFIG_OF_SEPARATE and confirmed normally
working in u-boot.
When kernel is booting, how could kernel access .dtb binary?
Could kernel access dtb binary by setting /memreserve/ in u-boot .dts file or
by using "fdtaddrcontrol"
environment variable in u-boot board file?
But, by my result, dt_phys address in setup_machine_fdt() in arch/arm/devtree.c
had always indicated only
one point regardless of /memreserve/ or fdtcontroladdr.
Thank you,
Donghwa Lee
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
