On 5/31/2012 10:24 AM, Fabio Estevam wrote:
Allow MX6Q I2C3 to work.
Cc: Heiko Schocher<h...@denx.de>
Signed-off-by: Fabio Estevam<fabio.este...@freescale.com>
---
drivers/i2c/mxc_i2c.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index c88ac7c..d3c323e 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -78,6 +78,8 @@ struct mxc_i2c_regs {
#define I2C_BASE I2C2_BASE_ADDR
#elif defined(CONFIG_SYS_I2C_MX35_PORT3)
#define I2C_BASE I2C3_BASE_ADDR
+#elif defined(CONFIG_SYS_I2C_MX6Q_PORT3)
+#define I2C_BASE I2C3_BASE_ADDR
#else
#error "define CONFIG_SYS_I2C_MX<Processor>_PORTx to use the mx I2C driver"
#endif
This conflicts with the patch that Stefano acked on May 6.
[PATCH 1/3] mxc_i2c: specify i2c base address in config file
The following platforms had their config files changed
flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd
Signed-off-by: Troy Kisky<troy.ki...@boundarydevices.com>
---
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +++++++
arch/arm/include/asm/arch-mx35/imx-regs.h | 2 +-
drivers/i2c/mxc_i2c.c | 25 ++++---------------------
include/configs/flea3.h | 2 +-
include/configs/imx31_phycore.h | 3 ++-
include/configs/mx35pdk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53smd.h | 2 +-
9 files changed, 19 insertions(+), 28 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h
b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 6454acb..7ddbbd6 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -606,6 +606,13 @@ struct esdc_regs {
#define UART4_BASE 0x43FB0000
#define UART5_BASE 0x43FB4000
+#define I2C1_BASE_ADDR 0x43f80000
+#define I2C1_CLK_OFFSET 26
+#define I2C2_BASE_ADDR 0x43F98000
+#define I2C2_CLK_OFFSET 28
+#define I2C3_BASE_ADDR 0x43f84000
+#define I2C3_CLK_OFFSET 30
+
#define ESDCTL_SDE (1<< 31)
#define ESDCTL_CMD_RW (0<< 28)
#define ESDCTL_CMD_PRECHARGE (1<< 28)
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h
b/arch/arm/include/asm/arch-mx35/imx-regs.h
index e570ad1..3146006 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -39,7 +39,7 @@
#define MAX_BASE_ADDR 0x43F04000
#define EVTMON_BASE_ADDR 0x43F08000
#define CLKCTL_BASE_ADDR 0x43F0C000
-#define I2C_BASE_ADDR 0x43F80000
+#define I2C1_BASE_ADDR 0x43F80000
#define I2C3_BASE_ADDR 0x43F84000
#define ATA_BASE_ADDR 0x43F8C000
#define UART1_BASE 0x43F90000
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index c88ac7c..416ffee 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -59,27 +59,10 @@ struct mxc_i2c_regs {
#define I2SR_IIF (1<< 1)
#define I2SR_RX_NO_AK (1<< 0)
-#if defined(CONFIG_SYS_I2C_MX31_PORT1)
-#define I2C_BASE 0x43f80000
-#define I2C_CLK_OFFSET 26
-#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
-#define I2C_BASE 0x43f98000
-#define I2C_CLK_OFFSET 28
-#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
-#define I2C_BASE 0x43f84000
-#define I2C_CLK_OFFSET 30
-#elif defined(CONFIG_SYS_I2C_MX53_PORT1)
-#define I2C_BASE I2C1_BASE_ADDR
-#elif defined(CONFIG_SYS_I2C_MX53_PORT2)
-#define I2C_BASE I2C2_BASE_ADDR
-#elif defined(CONFIG_SYS_I2C_MX35_PORT1)
-#define I2C_BASE I2C_BASE_ADDR
-#elif defined(CONFIG_SYS_I2C_MX35_PORT2)
-#define I2C_BASE I2C2_BASE_ADDR
-#elif defined(CONFIG_SYS_I2C_MX35_PORT3)
-#define I2C_BASE I2C3_BASE_ADDR
+#ifdef CONFIG_SYS_I2C_BASE
+#define I2C_BASE CONFIG_SYS_I2C_BASE
#else
-#error "define CONFIG_SYS_I2C_MX<Processor>_PORTx to use the mx I2C driver"
+#error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver"
#endif
#define I2C_MAX_TIMEOUT 10000
@@ -114,7 +97,7 @@ static uint8_t i2c_imx_get_clk(unsigned int rate)
(struct clock_control_regs *)CCM_BASE;
/* start the required I2C clock */
- writel(readl(&sc_regs->cgr0) | (3<< I2C_CLK_OFFSET),
+ writel(readl(&sc_regs->cgr0) | (3<< CONFIG_SYS_I2C_CLK_OFFSET),
&sc_regs->cgr0);
#endif
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index f046a58..75330c4 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -68,7 +68,7 @@
*/
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX35_PORT3
+#define CONFIG_SYS_I2C_BASE I2C3_BASE_ADDR
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_MXC_SPI
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 3153eb5..197cefa 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -54,7 +54,8 @@
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX31_PORT2
+#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index de4b954..dfe39b8 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -59,7 +59,7 @@
*/
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX35_PORT1
+#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_MXC_SPI
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index f48a41e..0bdf6a3 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -50,7 +50,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX53_PORT2
+#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index a77e5b2..3c7c329 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -53,7 +53,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX53_PORT2 1
+#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index a04db3f..a904130 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -50,7 +50,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX53_PORT2
+#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
-- 1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
