USB module pads are getting enabled under non-essential group. These will be required for fastboot, tftp support. So move this to essential list to have them working when non-essential pads are no more muxed.
Signed-off-by: R Sricharan <[email protected]> --- There are few checkpatch warnings for 80 characters. This is expected as per previous comments and the data looks better readable this way. board/ti/omap5_evm/mux_data.h | 18 +++++++++--------- board/ti/sdp4430/sdp4430_mux_data.h | 25 ++++++++++++------------- 2 files changed, 21 insertions(+), 22 deletions(-) diff --git a/board/ti/omap5_evm/mux_data.h b/board/ti/omap5_evm/mux_data.h index 296eb68..a82795d 100644 --- a/board/ti/omap5_evm/mux_data.h +++ b/board/ti/omap5_evm/mux_data.h @@ -47,6 +47,15 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3*/ {UART3_RX_IRRX, (PTU | IEN | M0)}, /* UART3_RX_IRRX */ {UART3_TX_IRTX, (M0)}, /* UART3_TX_IRTX */ + {USBB1_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB1_HSIC_STROBE */ + {USBB1_HSIC_DATA, (PTU | IEN | M0)}, /* USBB1_HSIC_DATA */ + {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */ + {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */ + {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE*/ + {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */ + {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */ + {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */ + {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ }; @@ -114,10 +123,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {UART2_CTS, (IEN | M1)}, /* MCSPI3_CS0 */ {UART2_RX, (IEN | M1)}, /* MCSPI3_SIMO */ {UART2_TX, (IEN | M1)}, /* MCSPI3_CLK */ - {USBB1_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB1_HSIC_STROBE */ - {USBB1_HSIC_DATA, (PTU | IEN | M0)}, /* USBB1_HSIC_DATA */ - {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */ - {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */ {TIMER10_PWM_EVT, (IEN | M0)}, /* TIMER10_PWM_EVT */ {DSIPORTA_TE0, (IEN | M0)}, /* DSIPORTA_TE0 */ {DSIPORTA_LANE0X, (IEN | M0)}, /* DSIPORTA_LANE0X */ @@ -254,11 +259,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {UART6_RTS, (PTU | M0)}, /* UART6_RTS */ {UART3_CTS_RCTX, (PTU | IEN | M6)}, /* GPIO5_153 */ {UART3_RTS_IRSD, (PTU | IEN | M1)}, /* HDQ_SIO */ - {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE*/ - {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */ - {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */ - {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */ - {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */ {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */ diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h index 6140b99..0760dad 100644 --- a/board/ti/sdp4430/sdp4430_mux_data.h +++ b/board/ti/sdp4430/sdp4430_mux_data.h @@ -53,8 +53,18 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ -{UART3_TX_IRTX, (M0)} /* uart3_tx */ - +{UART3_TX_IRTX, (M0)}, /* uart3_tx */ +{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ +{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ +{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ +{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ +{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ +{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ +{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ +{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ +{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ +{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ +{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ }; const struct pad_conf_entry wkup_padconf_array_essential[] = { @@ -135,14 +145,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */ {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */ - {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ - {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ - {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ - {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ - {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ - {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ - {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ - {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ @@ -210,9 +212,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */ {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */ {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */ - {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ - {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ - {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */ {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */ {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ -- 1.7.9.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
