On 21.06.2012 23:16, Troy Kisky wrote:
Micrel accidentally used the same part number
for the KS8721 and KSZ9021. So, both cannot be
in the same build of u-boot. Add a config option
to handle this.

Signed-off-by: Troy Kisky<[email protected]>
---
  drivers/net/phy/micrel.c        |   15 +++++++++++++--
  include/configs/mx6qsabrelite.h |    1 +
  2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index e3043df..30f3264 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -35,6 +35,12 @@ static struct phy_driver KSZ804_driver = {
        .shutdown =&genphy_shutdown,
  };

+#ifndef CONFIG_PHY_MICREL_KSZ9021
+/*
+ * I can't believe Micrel used the exact same part number
+ * for the KSZ9021
+ * Shame Micrel, Shame!!!!!
+ */
  static struct phy_driver KS8721_driver = {
        .name = "Micrel KS8721BL",
        .uid = 0x221610,
@@ -44,7 +50,9 @@ static struct phy_driver KS8721_driver = {
        .startup =&genphy_startup,
        .shutdown =&genphy_shutdown,
  };
+#endif

Acked-by: Vladimir Zapolskiy <[email protected]>


+#ifdef CONFIG_PHY_MICREL_KSZ9021
  /* ksz9021 PHY Registers */
  #define MII_KSZ9021_EXTENDED_CTRL     0x0b
  #define MII_KSZ9021_EXTENDED_DATAW    0x0c
@@ -127,12 +135,15 @@ static struct phy_driver ksz9021_driver = {
        .startup =&ksz9021_startup,
        .shutdown =&genphy_shutdown,
  };
+#endif

  int phy_micrel_init(void)
  {
        phy_register(&KSZ804_driver);
-       phy_register(&KS8721_driver);
+#ifdef CONFIG_PHY_MICREL_KSZ9021
        phy_register(&ksz9021_driver);
-
+#else
+       phy_register(&KS8721_driver);
+#endif
        return 0;
  }
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index feabc05..8623320 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -97,6 +97,7 @@
  #define CONFIG_FEC_MXC_PHYADDR                6
  #define CONFIG_PHYLIB
  #define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021

  /* USB Configs */
  #define CONFIG_CMD_USB

Best wishes,
Vladimir
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to