The information now is gathered from HW_DIGCTL_CHIPID register and includes the revision of the chip on the output.
Signed-off-by: Otavio Salvador <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> --- arch/arm/cpu/arm926ejs/mx28/mx28.c | 58 ++++++++++++++++++++++++++++++++++-- 1 file changed, 56 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c index a82ff25..15be605 100644 --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c @@ -38,6 +38,11 @@ DECLARE_GLOBAL_DATA_PTR; +/* Product code identification */ +#define CHIPID_MASK (0xffff << 16) +#define CHIPID_MX23 (0x3780 << 16) +#define CHIPID_MX28 (0x2800 << 16) + /* 1 second delay should be plenty of time for block reset. */ #define RESET_MAX_TIMEOUT 1000000 @@ -190,13 +195,62 @@ int arch_cpu_init(void) #endif #if defined(CONFIG_DISPLAY_CPUINFO) +static const char *get_cpu_type(void) +{ + struct mx28_digctl_regs *digctl_regs = + (struct mx28_digctl_regs *)MXS_DIGCTL_BASE; + + switch (readl(&digctl_regs->hw_digctl_chipid) & CHIPID_MASK) { + case CHIPID_MX28: + return "28"; + case CHIPID_MX23: + return "23"; + default: + return "<unknown>"; + } +} + +static const char *get_cpu_rev(void) +{ + struct mx28_digctl_regs *digctl_regs = + (struct mx28_digctl_regs *)MXS_DIGCTL_BASE; + uint8_t rev = readl(&digctl_regs->hw_digctl_chipid) & 0x000000FF; + + switch (readl(&digctl_regs->hw_digctl_chipid) & CHIPID_MASK) { + case CHIPID_MX28: + switch (rev) { + case 0x1: + return "TO1.2"; + default: + return "<unknown>"; + } + case CHIPID_MX23: + switch (rev) { + case 0x0: + return "TA1"; + case 0x1: + return "TA2"; + case 0x2: + return "TA3"; + case 0x3: + return "TA4"; + case 0x5: + return "TA5"; + } + default: + return "<unknown>"; + } +} + int print_cpuinfo(void) { struct mx28_spl_data *data = (struct mx28_spl_data *) ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); - printf("Freescale i.MX28 family at %d MHz\n", - mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("CPU: Freescale i.MX%s %s at %d MHz\n", + get_cpu_type(), + get_cpu_rev(), + mxc_get_clock(MXC_ARM_CLK) / 1000000); printf("BOOT: %s\n", mx28_boot_modes[data->boot_mode_idx].mode); return 0; } -- 1.7.10 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
