Dear Prafulla Wadaskar, > > -----Original Message----- > > From: Marek Vasut [mailto:[email protected]] > > Sent: 26 June 2012 17:45 > > To: [email protected] > > Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk > > Subject: [PATCH 2/3] KW: Add kw_adjust_dram() weak function > > > > This function shall allow a board to adjust DRAM parameters in case > > there are multiple versions of the board with different DRAM sizes. > > > > Signed-off-by: Marek Vasut <[email protected]> > > Cc: Prafulla Wadaskar <[email protected]> > > Cc: Wolfgang Denk <[email protected]> > > --- > > > > arch/arm/cpu/arm926ejs/kirkwood/dram.c | 11 +++++++++++ > > Instead I would like to suggest to add function name as > __kw_post_kwbconfig()
what about using board_early_init_f() ? > This typically addresses to reconfigure the default configuration done by > kwbimage.cfg, so the scope is not limited to DRAM configuration. > > Regards.. > Prafulla . . . Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
