Hi Minkyu Kang, Warning: ext2fs.c: In function 'ext2fs_read_file': ext2fs.c:443: warning: 'blocknxt' may be used uninitialized in this function
Is not related to my code changes. Regards, Rajeshwari Shinde. On Tue, Jul 3, 2012 at 6:10 PM, Minkyu Kang <[email protected]> wrote: > On 2 July 2012 20:36, Rajeshwari Shinde <[email protected]> wrote: >> This patch set adds support for Exynos5250 Rev 1.0. >> Exynos5250 Rev 1.0 supports DDR3 Memory configuration and >> support for LPDDR2 is removed. >> Exynos5250 Rev 1.0 supports DWMMC controller and does not support SDHCI >> controller. >> After DWMMC driver is added to Mainline support for generic S5P MMC driver >> will be removed. >> >> Due to Support of SDHCI controller currently still there for >> EXYNOS5 you can see the following error on boot. >> >> mmc_reset: timeout error >> mmc_change_clock: timeout error >> mmc_send_cmd: waiting for status update >> MMC init failed >> >> Changes in V2: >> - Included Paramateric structure with in #ifndef __ASSEMBLY__. >> Chnages in V3: >> - Incorporated the review comments. >> - Added support for BPLL. >> - Corrected the gpio pinmux settings. >> Changes in V4: >> - Fixed Warning message. >> Changes in V5: >> - Corrected indentation error. >> >> Rajeshwari Shinde (10): >> ARCH: SPL: Add parametric board initializer >> SMDK5250: SPL: Define parametric board initializer >> SMDK5250: Add smdk5250-uboot-spl.lds >> EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev >> 1.0 >> EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 >> Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 >> EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 >> EXYNOS5: CLOCK: Add BPLL support >> EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 >> SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 >> >> arch/arm/cpu/armv7/exynos/clock.c | 28 +- >> arch/arm/cpu/armv7/exynos/pinmux.c | 22 +- >> arch/arm/include/asm/arch-exynos/clk.h | 1 + >> arch/arm/include/asm/arch-exynos/clock.h | 237 +++++---- >> arch/arm/include/asm/arch-exynos/dmc.h | 65 +++ >> arch/arm/include/asm/arch-exynos/gpio.h | 7 +- >> arch/arm/include/asm/arch-exynos/spl.h | 97 ++++ >> board/samsung/smdk5250/Makefile | 3 +- >> board/samsung/smdk5250/clock_init.c | 714 +++++++++++++++++++---- >> board/samsung/smdk5250/clock_init.h | 149 +++++ >> board/samsung/smdk5250/dmc_common.c | 199 +++++++ >> board/samsung/smdk5250/dmc_init.c | 462 --------------- >> board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++++++ >> board/samsung/smdk5250/setup.h | 762 >> +++++++++++++++---------- >> board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 +++ >> board/samsung/smdk5250/smdk5250.c | 6 +- >> board/samsung/smdk5250/smdk5250_spl.c | 68 +++ >> include/configs/smdk5250.h | 7 +- >> 18 files changed, 2099 insertions(+), 1022 deletions(-) >> create mode 100644 arch/arm/include/asm/arch-exynos/spl.h >> create mode 100644 board/samsung/smdk5250/clock_init.h >> create mode 100644 board/samsung/smdk5250/dmc_common.c >> delete mode 100644 board/samsung/smdk5250/dmc_init.c >> create mode 100644 board/samsung/smdk5250/dmc_init_ddr3.c >> create mode 100644 board/samsung/smdk5250/smdk5250-uboot-spl.lds >> create mode 100644 board/samsung/smdk5250/smdk5250_spl.c >> > > Please fix compiler errors. > > ext2fs.c: In function 'ext2fs_read_file': > ext2fs.c:443: warning: 'blocknxt' may be used uninitialized in this function > dmc_init_ddr3.c: In function 'ddr3_mem_ctrl_init': > dmc_init_ddr3.c:196: warning: implicit declaration of function 'sdelay' > dmc_common.c: In function 'dmc_config_zq': > dmc_common.c:72: warning: implicit declaration of function 'sdelay' > In file included from tzpc_init.c:27: > setup.h:554: warning: 'struct exynos5_phy_control' declared inside > parameter list > setup.h:554: warning: its scope is only this definition or > declaration, which is probably not what you want > setup.h:562: warning: 'struct exynos5_dmc' declared inside parameter list > setup.h:570: warning: 'struct exynos5_dmc' declared inside parameter list > setup.h:578: warning: 'struct exynos5_dmc' declared inside parameter list > In file included from tzpc_init.c:27: > setup.h:588: warning: 'enum ddr_mode' declared inside parameter list > setup.h:588: warning: 'struct exynos5_dmc' declared inside parameter list > In file included from tzpc_init.c:27: > setup.h:554: warning: 'struct exynos5_phy_control' declared inside > parameter list > setup.h:554: warning: its scope is only this definition or > declaration, which is probably not what you want > setup.h:562: warning: 'struct exynos5_dmc' declared inside parameter list > setup.h:570: warning: 'struct exynos5_dmc' declared inside parameter list > setup.h:578: warning: 'struct exynos5_dmc' declared inside parameter list > In file included from tzpc_init.c:27: > setup.h:588: warning: 'enum ddr_mode' declared inside parameter list > setup.h:588: warning: 'struct exynos5_dmc' declared inside parameter list > dmc_init_ddr3.c: In function 'ddr3_mem_ctrl_init': > dmc_init_ddr3.c:196: warning: implicit declaration of function 'sdelay' > dmc_common.c: In function 'dmc_config_zq': > dmc_common.c:72: warning: implicit declaration of function 'sdelay' > > Thanks. > Minkyu Kang. > -- > from. prom. > www.promsoft.net > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
