On Thu, Jul 12, 2012 at 10:21:01AM +0200, Simon Glass wrote: > Hi Thierry, > > On Wed, Jul 11, 2012 at 7:48 AM, Thierry Reding > <thierry.red...@avionic-design.de> wrote: > > On Wed, Jul 11, 2012 at 06:44:10AM +0200, Simon Glass wrote: > >> Hi Stephen, > >> > >> On Fri, Jun 15, 2012 at 1:32 AM, Stephen Warren > >> <swar...@wwwdotorg.org>wrote: > >> > >> > On 06/13/2012 10:19 AM, Simon Glass wrote: > >> > > Add LCD definitions and also a proposed binding for LCD displays. > >> > > > >> > > The PWFM is in progress on the device-tree-discuss list, so only a > >> > > very basic binding is offered here. > >> > > >> > I believe we have settled on a final representation, it just hasn't been > >> > added into linux-next yet. See: > >> > > >> > > >> > http://gitorious.org/linux-pwm/linux-pwm/commit/d3ce73e5dc86646a6302f2b0f7dd40e8c552fa04 > >> > >> > >> Thanks for the pointer. I suppose this doesn't address clocks as yet, but > >> that's fine. > > > > I was waiting for the common clock framework and DT bindings to get > > ready. This should happen RSN for Tegra so I will probably look at > > adding support for it in. > > OK, are you looking at adding it in U-Boot?
No. I don't have much time to spend on U-Boot right now.
[...]
> I also need a place to put the pwm and GPIOs for the panel itself.
> Something like this:
>
> nvidia,pwm = <&pwm 2 0>;
> nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
> nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
> nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
> nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
> nvidia,panel-timings = <4 203 17 15>; (number of ms before
> turning
> on the next gpio)
> nvidia,bits-per-pixel = <16>; (er, TBD)
>
> I am thinking of something like a phandle in your rgb node:
>
> host1x {
> dc@54200000 {
> rgb {
> nvidia-panel = <&lcd_panel>;
> ...
>
> lcd_panel: panel {
> nvidia,pwm = <&pwm 2 0>;
> ...
> }
>
> Or have you already solved this problem another way?
Linux has a generic PWM backlight driver. This is currently solved by
using this in the DT:
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
Alex Courbot (Cc'd) has been working on adding a generic way to add GPIO
and regulator support to that. I don't know exactly what the
lvds-shutdown-gpios and panel-vdd-gpios properties do. If they control
hardware connected behind the display controller I suppose they could go
into the rgb node.
The panel alternative that you propose sounds interesting as well. Maybe
the panel should itself contain either a phandle or a subnode for the
backlight and collect the properties that you listed above.
Thierry
pgpYNmhJray01.pgp
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
