Note that this patch works with new dts. Please refer to: http://patchwork.ozlabs.org/patch/170617/
-Hongtao. > -----Original Message----- > From: Jia Hongtao-B38951 > Sent: Thursday, July 12, 2012 5:40 PM > To: [email protected] > Cc: [email protected]; sun york-R58495; Li Yang-R58472; Jia Hongtao- > B38951 > Subject: [PATCH] powerpc/sgmii: To support PHY link state auto detect in > SGMII mode > > PHYs on SGMII riser card are used in SGMII mode with different external > IRQs from eTSEC. This means in SGMII mode phy-handle and phy-connection- > type > under ethernet node should be updated. Otherwise the PHY interrupt can > not > be handled therefor PHY link state change can not be auto detected. > > For we have seperate SGMII PHY nodes, ethernet PHY reg fixup is not > needed > but it's still be kept to guarantee the sgmii mode could work with old > device tree. > > Signed-off-by: Li Yang <[email protected]> > Signed-off-by: Jia Hongtao <[email protected]> > --- > board/freescale/common/sgmii_riser.c | 57 > +++++++++++++++++++++++++++++----- > 1 files changed, 49 insertions(+), 8 deletions(-) > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
