> -----Original Message----- > From: Karl O. Pinc [mailto:[email protected]] > Sent: 03 August 2012 08:22 > To: Prafulla Wadaskar; [email protected] > Cc: Karl O. Pinc > Subject: [PATCH] cosmetic: Better explain how to use the kirkwood > kwbimage.cfg file. > > Hi, > > This adds to the documenation to explain how to use the > kwbimage.cfg file necessary to generate an image with > prefixed board setup values necessary for the kirkwood > boards. > > Signed-off-by: Karl O. Pinc <[email protected]> > --- > doc/README.kwbimage | 17 ++++++++++++++--- > 1 files changed, 14 insertions(+), 3 deletions(-) > > diff --git a/doc/README.kwbimage b/doc/README.kwbimage > index 7f15e6d..e91c387 100644 > --- a/doc/README.kwbimage > +++ b/doc/README.kwbimage > @@ -25,13 +25,24 @@ for ex. > -T kwbimage -a 0x00600000 -e 0x00600000 \ > -d u-boot.bin u-boot.kwb > > + > kwbimage support available with mkimage utility will generate > kirkwood boot > -image that can be flashed on the board NAND/SPI flash > +image that can be flashed on the board NAND/SPI flash. The make > target > +which uses mkimage to produce such an image is "u-boot.kwb". For > example: > + > + export BUILD_DIR=/tmp/build > + make distclean > + make yourboard_config > + make $BUILD_DIR/u-boot.kwb > + > > Board specific configuration file specifications: > ------------------------------------------------ > -1. This file must present in the $(BOARDDIR) and the name should be > - kwbimage.cfg (since this is used in Makefile) > +1. This file must present in the $(BOARDDIR). The default name is > + kwbimage.cfg. The name can be set as part of the full path > + to the file using CONFIG_SYS_KWD_CONFIG (probably in > + include/configs/<yourboard>.h). The path should look like: > + $(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg > 2. This file can have empty lines and lines starting with "#" as > first > character to put comments > 3. This file can have configuration command lines as mentioned below, > --
Acked by: Prafulla Wadaskar <[email protected]> I will pull this patch latter. Regards... Prafulla . . . _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
