On 28/07/2012 23:44, Otavio Salvador wrote: > The mx28 prefix has been added to the initialization data and function > so it is clear by which SoC it is used as i.MX233 will have a specific > one. While on that, we also change it to static. > > Signed-off-by: Otavio Salvador <[email protected]> > --- > Changes in v2: > - use static for the allocation of memory initialization matrix > > Changes in v3: > - change short-description prefix > > arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c > b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c > index e17a4d7..cca1316 100644 > --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c > +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c > @@ -31,7 +31,7 @@ > > #include "mx28_init.h" > > -uint32_t dram_vals[] = { > +static uint32_t mx28_dram_vals[] = { > 0x00000000, 0x00000000, 0x00000000, 0x00000000, > 0x00000000, 0x00000000, 0x00000000, 0x00000000, > 0x00000000, 0x00000000, 0x00000000, 0x00000000, > @@ -88,14 +88,14 @@ void __mx28_adjust_memory_params(uint32_t *dram_vals) > void mx28_adjust_memory_params(uint32_t *dram_vals) > __attribute__((weak, alias("__mx28_adjust_memory_params"))); > > -void init_m28_200mhz_ddr2(void) > +void init_mx28_200mhz_ddr2(void) > { > int i; > > - mx28_adjust_memory_params(dram_vals); > + mx28_adjust_memory_params(mx28_dram_vals); > > - for (i = 0; i < ARRAY_SIZE(dram_vals); i++) > - writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); > + for (i = 0; i < ARRAY_SIZE(mx28_dram_vals); i++) > + writel(mx28_dram_vals[i], MXS_DRAM_BASE + (4 * i)); > } > > void mx28_mem_init_clock(void) > @@ -230,7 +230,7 @@ void mx28_mem_init(void) > /* Clear START bit from DRAM_CTL16 */ > clrbits_le32(MXS_DRAM_BASE + 0x40, 1); > > - init_m28_200mhz_ddr2(); > + init_mx28_200mhz_ddr2(); > > /* Clear SREFRESH bit from DRAM_CTL17 */ > clrbits_le32(MXS_DRAM_BASE + 0x44, 1); >
Acked-by : Stefano Babic <[email protected]> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
