fix a bug:
when not boot from NAND, the NAND flash can not be detected.
Using this to fix it
Signed-off-by: Bo Shen <voice.s...@atmel.com>
---
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 17db0fd..88b3478 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -60,6 +60,8 @@ static void at91sam9x5ek_nand_hw_init(void)
/* Enable CS3 */
csa = readl(&matrix->ebicsa);
csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ /* NAND flash on D16 */
+ csa |= AT91_MATRIX_NFD0_ON_D16;
writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
