Device driver for Zynq Gem IP.
Signed-off-by: Michal Simek <mon...@monstr.eu>
CC: Joe Hershberger <joe.hershber...@gmail.com>
---
v2: Remove phylib protection
Rename driver file name xilinx_gem to zynq_gem
Rename XEMACPSS to ZYNQ_GEM
Rename gemac_priv to zynq_gem_priv
Rename gem_regs to zynq_gem_regs
Add zynq_ prefix to several functions
Remove phy detection
Rename driver name XGem to Gem
Change setup_mac function to reflect u-boot style
---
drivers/net/Makefile | 1 +
drivers/net/zynq_gem.c | 453 ++++++++++++++++++++++++++++++++++++++++++++++++
include/netdev.h | 2 +-
3 files changed, 455 insertions(+), 1 deletions(-)
create mode 100644 drivers/net/zynq_gem.c
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 430f90c..b298588 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -79,6 +79,7 @@ COBJS-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o
COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
COBJS-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \
xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o
+COBJS-$(CONFIG_ZYNQ_GEM) += zynq_gem.o
COBJS := $(sort $(COBJS-y))
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
new file mode 100644
index 0000000..d62a493
--- /dev/null
+++ b/drivers/net/zynq_gem.c
@@ -0,0 +1,453 @@
+/*
+ * (C) Copyright 2011 Michal Simek
+ *
+ * Michal SIMEK <mon...@monstr.eu>
+ *
+ * Based on Xilinx gmac driver:
+ * (C) Copyright 2011 Xilinx
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <config.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <phy.h>
+#include <miiphy.h>
+
+#if !defined(CONFIG_PHYLIB)
+# error XILINX_GEM_ETHERNET requires PHYLIB
+#endif
+
+/* Bit/mask specification */
+#define ZYNQ_GEM_PHYMNTNC_OP_MASK 0x40020000 /* operation mask bits */
+#define ZYNQ_GEM_PHYMNTNC_OP_R_MASK 0x20000000 /* read operation */
+#define ZYNQ_GEM_PHYMNTNC_OP_W_MASK 0x10000000 /* write operation */
+#define ZYNQ_GEM_PHYMNTNC_PHYAD_SHIFT_MASK 23 /* Shift bits for PHYAD */
+#define ZYNQ_GEM_PHYMNTNC_PHREG_SHIFT_MASK 18 /* Shift bits for PHREG */
+
+#define ZYNQ_GEM_RXBUF_EOF_MASK 0x00008000 /* End of frame. */
+#define ZYNQ_GEM_RXBUF_SOF_MASK 0x00004000 /* Start of frame. */
+#define ZYNQ_GEM_RXBUF_LEN_MASK 0x00003FFF /* Mask for length
field */
+
+#define ZYNQ_GEM_RXBUF_WRAP_MASK 0x00000002 /* Wrap bit, last BD */
+#define ZYNQ_GEM_RXBUF_NEW_MASK 0x00000001 /* Used bit.. */
+#define ZYNQ_GEM_RXBUF_ADD_MASK 0xFFFFFFFC /* Mask for address
*/
+
+/* Wrap bit, last descriptor */
+#define ZYNQ_GEM_TXBUF_WRAP_MASK 0x40000000
+#define ZYNQ_GEM_TXBUF_LAST_MASK 0x00008000 /* Last buffer */
+
+#define ZYNQ_GEM_TXSR_HRESPNOK_MASK 0x00000100 /* Transmit hresp not OK */
+#define ZYNQ_GEM_TXSR_URUN_MASK 0x00000040 /* Transmit underrun
*/
+/* Transmit buffs exhausted mid frame */
+#define ZYNQ_GEM_TXSR_BUFEXH_MASK 0x00000010
+
+#define ZYNQ_GEM_NWCTRL_TXEN_MASK 0x00000008 /* Enable transmit */
+#define ZYNQ_GEM_NWCTRL_RXEN_MASK 0x00000004 /* Enable receive */
+#define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */
+#define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */
+
+#define ZYNQ_GEM_NWSR_MDIOIDLE_MASK 0x00000004 /* PHY management idle */
+
+/* Device registers */
+struct zynq_gem_regs {
+ u32 nwctrl; /* Network Control reg */
+ u32 nwcfg; /* Network Config reg */
+ u32 nwsr; /* Network Status reg */
+ u32 reserved1;
+ u32 dmacr; /* DMA Control reg */
+ u32 txsr; /* TX Status reg */
+ u32 rxqbase; /* RX Q Base address reg */
+ u32 txqbase; /* TX Q Base address reg */
+ u32 rxsr; /* RX Status reg */
+ u32 reserved2[2];
+ u32 idr; /* Interrupt Disable reg */
+ u32 reserved3;
+ u32 phymntnc; /* Phy Maintaince reg */
+ u32 reserved4[18];
+ u32 hashl; /* Hash Low address reg */
+ u32 hashh; /* Hash High address reg */
+#define LADDR_LOW 0
+#define LADDR_HIGH 1
+ u32 laddr[4][LADDR_HIGH + 1]; /* Specific1 addr low/high reg */
+ u32 match[4]; /* Type ID1 Match reg */
+ u32 reserved6[18];
+ u32 stat[44]; /* Octects transmitted Low reg - stat start */
+};
+
+/* BD descriptors */
+struct emac_bd {
+ u32 addr; /* Next descriptor pointer */
+ u32 status;
+};
+
+#define RX_BUF 3
+
+/* Initialized, rxbd_current, rx_first_buf must be 0 after init */
+struct zynq_gem_priv {
+ struct emac_bd tx_bd;
+ struct emac_bd rx_bd[RX_BUF];
+ u32 initialized;
+ char rxbuffers[RX_BUF * PKTSIZE_ALIGN];
+ u32 rxbd_current;
+ u32 rx_first_buf;
+ int phyaddr;
+ struct phy_device *phydev;
+ struct mii_dev *bus;
+};
+
+static inline int mdio_wait(struct eth_device *dev)
+{
+ struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
+ u32 timeout = 200;
+
+ /* Wait till MDIO interface is ready to accept a new transaction. */
+ while (timeout && !(readl(®s->nwsr) & ZYNQ_GEM_NWSR_MDIOIDLE_MASK)) {
+ timeout--;
+ udelay(1);
+ }
+
+ if (!timeout) {
+ printf("%s: Timeout\n", __func__);
+ return 1;
+ }
+
+ return 0;
+}
+
+static u32 phy_setup_op(struct eth_device *dev, u32 phy_addr, u32 regnum,
+ u32 op, u16 *data)
+{
+ u32 mgtcr;
+ struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
+
+ if (mdio_wait(dev))
+ return 1;
+
+ /* Construct mgtcr mask for the operation */
+ mgtcr = ZYNQ_GEM_PHYMNTNC_OP_MASK | op |
+ (phy_addr << ZYNQ_GEM_PHYMNTNC_PHYAD_SHIFT_MASK) |
+ (regnum << ZYNQ_GEM_PHYMNTNC_PHREG_SHIFT_MASK) | *data;
+
+ /* Write mgtcr and wait for completion */
+ writel(mgtcr, ®s->phymntnc);
+
+ if (mdio_wait(dev))
+ return 1;
+
+ if (op == ZYNQ_GEM_PHYMNTNC_OP_R_MASK)
+ *data = readl(®s->phymntnc);
+
+ return 0;
+}
+
+static u32 phyread(struct eth_device *dev, u32 phy_addr, u32 regnum, u16 *val)
+{
+ return phy_setup_op(dev, phy_addr, regnum,
+ ZYNQ_GEM_PHYMNTNC_OP_R_MASK, val);
+}
+
+static u32 phywrite(struct eth_device *dev, u32 phy_addr, u32 regnum, u16 data)
+{
+ return phy_setup_op(dev, phy_addr, regnum,
+ ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data);
+}
+
+static int zynq_gem_setup_mac(struct eth_device *dev)
+{
+ u32 i, macaddrlow, macaddrhigh;
+ struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
+
+ /* Set the MAC bits [31:0] in BOT */
+ macaddrlow = dev->enetaddr[0];
+ macaddrlow |= dev->enetaddr[1] << 8;
+ macaddrlow |= dev->enetaddr[2] << 16;
+ macaddrlow |= dev->enetaddr[3] << 24;
+
+ /* Set MAC bits [47:32] in TOP */
+ macaddrhigh |= dev->enetaddr[4];
+ macaddrhigh |= dev->enetaddr[5] << 8;
+
+ for (i = 0; i < 4; i++) {
+ writel(0, ®s->laddr[i][LADDR_LOW]);
+ writel(0, ®s->laddr[i][LADDR_HIGH]);
+ /* Do not use MATCHx register */
+ writel(0, ®s->match[i]);
+ }
+
+ writel(macaddrlow, ®s->laddr[0][LADDR_LOW]);
+ writel(macaddrhigh, ®s->laddr[0][LADDR_HIGH]);
+
+ return 0;
+}
+
+static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
+{
+ int tmp;
+ int i;
+ struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
+ struct zynq_gem_priv *priv = dev->priv;
+ struct phy_device *phydev;
+ u32 supported = SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full;
+
+ if (priv->initialized)
+ return 0;
+
+ /* Disable all interrupts */
+ writel(0xFFFFFFFF, ®s->idr);
+
+ /* Disable the receiver & transmitter */
+ writel(0, ®s->nwctrl);
+ writel(0, ®s->txsr);
+ writel(0, ®s->rxsr);
+ writel(0, ®s->phymntnc);
+
+ /* Clear the Hash registers for the mac address pointed by AddressPtr */
+ writel(0x0, ®s->hashl);
+ /* Write bits [63:32] in TOP */
+ writel(0x0, ®s->hashh);
+
+ /* Clear all counters */
+ for (i = 0; i <= (sizeof(struct zynq_gem_regs) -
+ offsetof(struct zynq_gem_regs, stat)) / 4; i++)
+ readl(®s->stat[i]);
+
+ /* Setup RxBD space */
+ memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd));
+ /* Create the RxBD ring */
+ memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers));
+
+ for (i = 0; i < RX_BUF; i++) {
+ priv->rx_bd[i].status = 0xF0000000;
+ priv->rx_bd[i].addr = (u32)((char *) &(priv->rxbuffers) +
+ (i * PKTSIZE_ALIGN));
+ }
+ /* WRAP bit to last BD */
+ priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK;
+ /* Write RxBDs to IP */
+ writel((u32) &(priv->rx_bd), ®s->rxqbase);
+
+
+ /* MAC Setup */
+ /*
+ * Following is the setup for Network Configuration register.
+ * Bit 0: Set for 100 Mbps operation.
+ * Bit 1: Set for Full Duplex mode.
+ * Bit 4: Unset to allow Copy all frames - MAC checking
+ * Bit 17: Set for FCS removal.
+ * Bits 20-18: Set with value binary 010 to divide pclk by 32
+ * (pclk up to 80 MHz)
+ */
+ writel(0x000A0003, ®s->nwcfg);
+
+ /*
+ * Following is the setup for DMA Configuration register.
+ * Bits 4-0: To set AHB fixed burst length for DMA data operations ->
+ * Set with binary 00100 to use INCR4 AHB bursts.
+ * Bits 9-8: Receiver packet buffer memory size ->
+ * Set with binary 11 to Use full configured addressable space (8 Kb)
+ * Bit 10 : Transmitter packet buffer memory size ->
+ * Set with binary 1 to Use full configured addressable space (4 Kb)
+ * Bits 23-16 : DMA receive buffer size in AHB system memory ->
+ * Set with binary 00011000 to use 1536 byte(1*max length frame/buffer)
+ */
+ writel(0x00180704, ®s->dmacr);
+
+ /*
+ * Following is the setup for Network Control register.
+ * Bit 2: Set to enable Receive operation.
+ * Bit 3: Set to enable Transmitt operation.
+ * Bit 4: Set to enable MDIO operation.
+ */
+ tmp = readl(®s->nwctrl);
+ /* MDIO, Rx and Tx enable */
+ tmp |= ZYNQ_GEM_NWCTRL_MDEN_MASK | ZYNQ_GEM_NWCTRL_RXEN_MASK |
+ ZYNQ_GEM_NWCTRL_TXEN_MASK;
+ writel(tmp, ®s->nwctrl);
+
+ /* interface - look at tsec */
+ phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0);
+
+ phydev->supported &= supported;
+ phydev->advertising = phydev->supported;
+ priv->phydev = phydev;
+ phy_config(phydev);
+ phy_startup(phydev);
+
+ priv->initialized = 1;
+ return 0;
+}
+
+static int zynq_gem_send(struct eth_device *dev, void *ptr, int len)
+{
+ int status;
+ u32 val;
+ struct zynq_gem_priv *priv = dev->priv;
+ struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
+
+ if (!priv->initialized) {
+ puts("Error GMAC not initialized");
+ return -1;
+ }
+
+ /* setup BD */
+ writel((u32)&(priv->tx_bd), ®s->txqbase);
+
+ /* Setup Tx BD */
+ memset((void *) &(priv->tx_bd), 0, sizeof(struct emac_bd));
+
+ priv->tx_bd.addr = (u32)ptr;
+ priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK |
+ ZYNQ_GEM_TXBUF_WRAP_MASK;
+
+ /* Start transmit */
+ val = readl(®s->nwctrl) | ZYNQ_GEM_NWCTRL_STARTTX_MASK;
+ writel(val, ®s->nwctrl);
+
+ /* Read the stat register to know if the packet has been transmitted */
+ status = readl(®s->txsr);
+ if (status & (ZYNQ_GEM_TXSR_HRESPNOK_MASK | ZYNQ_GEM_TXSR_URUN_MASK |
+ ZYNQ_GEM_TXSR_BUFEXH_MASK)) {
+ printf("Something has gone wrong here!? Status is 0x%x.\n",
+ status);
+ }
+
+ /* Clear Tx status register before leaving . */
+ writel(status, ®s->txsr);
+ return 0;
+}
+
+/* Do not check frame_recd flag in rx_status register 0x20 - just poll BD */
+static int zynq_gem_recv(struct eth_device *dev)
+{
+ int frame_len;
+ struct zynq_gem_priv *priv = dev->priv;
+
+ if (!(priv->rx_bd[priv->rxbd_current].addr & ZYNQ_GEM_RXBUF_NEW_MASK))
+ return 0;
+
+ if (!(priv->rx_bd[priv->rxbd_current].status &
+ (ZYNQ_GEM_RXBUF_SOF_MASK | ZYNQ_GEM_RXBUF_EOF_MASK))) {
+ printf("GEM: SOF or EOF not set for last buffer received!\n");
+ return 0;
+ }
+
+ frame_len = priv->rx_bd[priv->rxbd_current].status &
+ ZYNQ_GEM_RXBUF_LEN_MASK;
+ if (frame_len) {
+ NetReceive((u8 *) (priv->rx_bd[priv->rxbd_current].addr &
+ ZYNQ_GEM_RXBUF_ADD_MASK), frame_len);
+
+ if (priv->rx_bd[priv->rxbd_current].status &
+ ZYNQ_GEM_RXBUF_SOF_MASK)
+ priv->rx_first_buf = priv->rxbd_current;
+ else {
+ priv->rx_bd[priv->rxbd_current].addr &=
+ ~ZYNQ_GEM_RXBUF_NEW_MASK;
+ priv->rx_bd[priv->rxbd_current].status = 0xF0000000;
+ }
+
+ if (priv->rx_bd[priv->rxbd_current].status &
+ ZYNQ_GEM_RXBUF_EOF_MASK) {
+ priv->rx_bd[priv->rx_first_buf].addr &=
+ ~ZYNQ_GEM_RXBUF_NEW_MASK;
+ priv->rx_bd[priv->rx_first_buf].status = 0xF0000000;
+ }
+
+ if ((++priv->rxbd_current) >= RX_BUF)
+ priv->rxbd_current = 0;
+
+ return frame_len;
+ }
+
+ return 0;
+}
+
+static void zynq_gem_halt(struct eth_device *dev)
+{
+ return;
+}
+
+static int zynq_gem_miiphyread(const char *devname, uchar addr,
+ uchar reg, ushort *val)
+{
+ struct eth_device *dev = eth_get_dev();
+ int ret;
+
+ ret = phyread(dev, addr, reg, val);
+ debug("%s 0x%x, 0x%x, 0x%x\n", __func__, addr, reg, *val);
+ return ret;
+}
+
+static int zynq_gem_miiphy_write(const char *devname, uchar addr,
+ uchar reg, ushort val)
+{
+ struct eth_device *dev = eth_get_dev();
+
+ debug("%s 0x%x, 0x%x, 0x%x\n", __func__, addr, reg, val);
+ return phywrite(dev, addr, reg, val);
+}
+
+int zynq_gem_initialize(bd_t *bis, int base_addr)
+{
+ struct eth_device *dev;
+ struct zynq_gem_priv *priv;
+
+ dev = calloc(1, sizeof(*dev));
+ if (dev == NULL)
+ return -1;
+
+ dev->priv = calloc(1, sizeof(struct zynq_gem_priv));
+ if (dev->priv == NULL) {
+ free(dev);
+ return -1;
+ }
+ priv = dev->priv;
+
+#ifdef CONFIG_PHY_ADDR
+ priv->phyaddr = CONFIG_PHY_ADDR;
+#else
+ priv->phyaddr = -1;
+#endif
+
+ sprintf(dev->name, "Gem.%x", base_addr);
+
+ dev->iobase = base_addr;
+
+ dev->init = zynq_gem_init;
+ dev->halt = zynq_gem_halt;
+ dev->send = zynq_gem_send;
+ dev->recv = zynq_gem_recv;
+ dev->write_hwaddr = zynq_gem_setup_mac;
+
+ eth_register(dev);
+
+ miiphy_register(dev->name, zynq_gem_miiphyread, zynq_gem_miiphy_write);
+ priv->bus = miiphy_get_dev_by_name(dev->name);
+
+ return 1;
+}
diff --git a/include/netdev.h b/include/netdev.h
index d1aaf0c..b8d303d 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -104,7 +104,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long
base_addr,
int txpp, int rxpp);
int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
unsigned long ctrl_addr);
-
+int zynq_gem_initialize(bd_t *bis, int base_addr);
/*
* As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
* exported by a public hader file, we need a global definition at this point.
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
